The Red Bucket

26. The problem with using Shore D hardness for intumescent coatings (Feat. Michael Hollman)

Mon, 02 Mar 2026 18:52:18 -0000

Summary

An intumescent coating can be qualified or disqualified for use simply because it falls above or below a certain magical hardness level, usually as measured on the Shore D scale. But hardness has no influence on performance, and the Shore D scale just doesn’t make sense when assessing softer intumescent technology types. Fireproofing industry veteran Michael Hollman explains the consequences of misusing Shore D hardness in intumescent coating specifications.

Also, Michael worries that his brother-in-law might soon beat him at snooker.

Timestamps

00:00 - Introduction
03:01 - How the industry's understanding of hardness has evolved
05:55 - Durometers' importance in measuring coating hardness
07:31 - Matching different Shore scales to different coating technologies
09:39 - When standards are "cut-and-pasted" without context
13:34 - Harder is not universally better
18:15 - Elasticity, damage resistance, and impact recovery
21:12 - Viewing Shore values as a reference point, not a product differentiator
22:40 - The four questions

BONUS - Regulatory affairs in Europe

Sun, 17 Aug 2025 22:34:44 -0000

Summary

Nel nuovo episodio del nostro podcast, parliamo di un tema spesso percepito come tecnico e complesso, ma in realtà sempre più strategico: il mondo del Regulatory nei rivestimenti industriali. Ne discutiamo con Alice Paiotta, Regulatory & Quality Assurance Manager Europe in Carboline, che ci guida in un viaggio tra REACH, sostenibilità, rischi normativi, competitività e innovazione.

Timestamps

00:53 – Introduzione
01:16 – Presentazione dell’ospite: Alice Paiotta
02:03 – Che cos’è il regulatory in un’azienda che produce rivestimenti e prodotti antincendio
02:40 – I principali regolamenti applicabili in Europa
03:34 – Focus sul Regolamento REACH
04:21 – Le autorità competenti in Europa per il settore dei rivestimenti
05:44 – Come è evoluta la regolamentazione negli ultimi decenni
08:22 – Codice UFI: di cosa si tratta e a cosa serve
08:53 – Il futuro del regulatory secondo Alice
10:46 – L’aggiornamento delle liste di sostanze: un processo continuo
11:14 – Regolamenti europei e sostenibilità: sempre più interconnessi
13:33 – Le conseguenze della non conformità normativa (legali, economiche, reputazionali)
16:20 – Come assicurarci di non commercializzare prodotti non conformi
19:25 – Regulatory come vantaggio competitivo: quando la conformità diventa strategia
22:50 – Le principali sfide da affrontare per restare conformi
24:48 – Il percorso di Alice: dalla chimica al regulatory
28:02 – Domande extra per chiudere in leggerezza

25. Renovating the iconic Santiago Bernabeu Stadium (Feat. Juan Pablo Ortega [again])

Wed, 25 Jun 2025 14:19:01 -0000

Summary

Santiago Bernabeu Stadium in Madrid, Spain, is the iconic home of legendary soccer club Real Madrid. A recent five-year renovation has transformed the stadium into a modern engineering marvel. Fireproofing and corrosion protection coating systems each played a role in the mega project, and in this episode, Carboline’s Europe Director of Project Development, Juan Pablo Ortega, leads a tour of his favorite team’s new digs. Also, is it possible for another country to have larger portion sizes than America? Timestamps

00:00 – Introduction
02:32 – Summarizing the renovation of Santiago Bernabeu Stadium
05:10 – Differing fire ratings for different uses of a structure
06:15 – Why both cementitious and intumescent fireproofing types were used
08:20 – Specifying heavy-duty Pyrocrete 40
10:52 – Nullifire SC 902 intumescent fireproofing was uniquely qualified for this project
13:34 – Primer, fireproofing, and topcoat specification for the retractable trays
16:17 – Navigating an aggressive schedule during the COVID-19 pandemic
17:20 – Juan Pablo returns to the site
18:28 – The Four Questions

24. Fluoropolymers: The unbeatable resin technology for water tank topcoats (Feat. Jeremy Sukola and Kristen Blankenship)

Fri, 09 May 2025 17:51:24 -0000

Summary Fluoropolymer-based finish coats are the premier performers for elevated water storage tanks in exterior exposures. The specialty FEVE resin on which they are based withstands intense UV radiation, high winds, and intense precipitation while holding gloss and color for decades. And while all of that comes at a cost, water industry expert Jeremy Sukola and chemistry nerd Kristen Blankenship explain how that cost represents a long-term investment that boasts a handsome return. In this episode of The Red Bucket, learn the chemistry, use cases, and regulatory considerations of fluoropolymer topcoats. Also, Kristen ponders the Atlantic Ocean from the top of a cliff, and Jeremy shares a strong opinion about spaghetti sauce. Timestamps

00:00 – Introduction
02:00 – A brief history of fluoropolymers
04:41 – Composition and properties of fluoropolymer coatings
08:51 – The role of fluoropolymer topcoats in water tank coating systems
13:05 – Fluoropolymer finish coat performance vs. other common technologies
15:08 – Fluoropolymer finish coats are not always the best fit
17:17 – Promoting long-term visual appeal
19:36 – Application properties
21:04 – The cost of novel chemistry
24:05 – Lifecycle cost benefits of fluoropolymer products
25:52 – Human health, PFAS, and forever chemical concerns
32:02 – The regulatory landscape today
33:53 – Key takeaways
35:14 – The Four Questions

23. Acrylamide leak sealing grouts (Feat. Michael Vargo)

Fri, 25 Apr 2025 14:56:00 -0000

Summary

Acrylamide grout technology dominates the underground wastewater collection leak sealing landscape. Legacy dry-granule and modern liquid variants give operators tremendous flexibility to address challenges of almost any scope or scale. But how do acrylamides work? Why do they work so well? And what do municipalities or private network owners need to know about how they fit into the broader maintenance and repair ecosystem? Michael Vargo of Prime Resins is the man with the answers.

Also, Michael considers what it would be like to be 6’10”.

Timestamps

00:00 – Introduction
02:24 – Defining acrylamide grouts
04:09 – Water/wastewater use cases and how the technology works
10:04 – Comparing granular vs. liquid acrylamide grouts
12:57 – How weather impacts application
14:30 – Acrylamides vs. alternative technologies
16:44 – Use cases for acrylamide grouts outside of water/wastewater
19:34 – Why Prime Resins earned NSF 61 certification for its liquid acrylamide
22:12 – Ideal water sources for granule format
23:03 – Necessity of training for preparation and use of acrylamide grouts
25:37 – Acrylamide grouts are one piece of a bigger maintenance/repair puzzle
33:00 – The four questions

22. Protecting molten sulfur tank cars (Feat. Lupe Pavon and Steve Liebhart)

Mon, 17 Mar 2025 18:45:56 -0000

Summary

Sulfur, an instrumental commodity to global industry, is a highly corrosive commodity typically shipped via rail in a molten state. Shippers must take care to protect their rolling stock by applying linings that resist heat, chemicals, and impacts. In this episode, rail industry expert Lupe Pavon and tank lining expert Steve Liebhart explore service environment, cleaning/surface preparation, and protective lining principles for rail cars in molten sulfur service. They also relate interesting findings from a field inspection. And, Steve considers himself a near-perfect driver in the snow, and Lupe reveals his favorite vegetable. **Timestamps **

00:00 – Introduction
02:11 – Corrosion mechanisms and failure modes of molten sulfur tank cars
05:36 – A highly stressful service environment for a lining
09:01 – Pitting corrosion and substrate blending for surface preparation
14:12 – Carboline’s new Plasite XHT 400 hybrid epoxy lining
18:14 – Eliminating an extra step in the surface preparation process
18:38 – We inspected Plasite XHT 400 in two cars after 30+ months in service
25:27 – The Four Questions

BONUS - Estadio Santiago Bernabeu (Con Juan Pablo Ortega y Emilie Musso)

Thu, 20 Feb 2025 03:33:15 -0000

En el episodio inaugural en Español de The Red Bucket, nuestros compañeros de Carboline España Juan Pablo Ortega y Emilie Musso hablan sobre la reciente renovación del icónico Estadio Santiago Bernabéu en Madrid, España. El alcance del proyecto incluyó la aplicación de materiales ignífugos cementosos e intumescentes, así como recubrimientos protectores de alto rendimiento. 00:58 – Introducción: Presentación de Emilie Musso y Juan Pablo Ortega. 02:24 – Renovación del estadio: Alcance del proyecto. 04:21 – Requisitos contra incendios: Normas aplicadas en estadios. 05:47  – Césped retráctil: Impacto en los revestimientos. 07:28 –  Tipos de protección: Uso de mortero y pintura intumescente. 08:55 – Pyrocrete 40: Beneficios y aplicación. 10:20 – Nullifire SC902: Dónde y por qué se usó. 13:55 – Aplicación en una sola capa: Importancia del espesor. 15:58 – Protección anticorrosión: Recubrimientos adicionales. 17:15 – Plazos exigentes: Cómo se cumplió el tiempo. 18:51 – Cierre: Reflexión final sobre el proyecto. 20:45 – Preguntas extra: Toque personal para cerrar el episodio.

21. Zinc and a comparison of painting, galvanizing, and metalizing (Feat. Kristen Blankenship)

Thu, 06 Feb 2025 17:34:35 -0000

It's taken for granted in the corrosion industry that zinc protects steel. But there's more than one way to put zinc on steel and more than one mechanism at work that makes it so protective. Kristen Blankenship returns to The Red Bucket to answer some big questions with even bigger implications:

What's zinc actually doing on painted, galvanized, and metalized surfaces?
How do these corrosion protection methods compare in terms of performance?
Does the standard "zinc-epoxy-urethane" coating system hold zinc-rich primers back from performing as well as they could on their own?
How many ISO 12944-9 testing cycles will it take before any corrosion appears on panels coated in a two-coat inorganic system?

Kristen also contemplates the deathbed of a lonely scientist.

00:00 – Intro
02:13 – A very brief history of cathodic protection
04:05 – Electron chemistry explains behavior
06:15 – Summarizing galvanizing, metalizing, and painting
14:15 – Silicate resin technology is understudied
15:47 – Comparing adhesion of each method
17:09 – Engineers understand paint differently than the other methods
20:16 – Surprising results from cyclic aging testing of a two-coat inorganic system
23:43 – Why is paint held to a higher standard?
26:48 – Zinc loading and a sustainability comparison

Find out more at https://carboline-tech-service-podcast.pinecast.co

20. No magic paint (Feat. Eric Zimmerman and Jeremy Sukola)

Wed, 18 Dec 2024 15:30:00 -0000

Water/wastewater operator customers are asking some strange questions lately. To experts Jeremy Sukola and Eric Zimmerman, it’s as if they’re asking for magic paint. In this episode, we identify an emerging demographic trend and the knowledge gap it’s created. Then, Jeremy and Eric explain why the best ways to close that gap are to have hard conversations early and be involved in educating the next generation.

Also, Eric imagines a driving range on the Mayflower and takes a bold stance against eggnog.

0:00 – Introduction
03:08 – Strange questions from customers
05:44 – Understanding capabilities and tackling misconceptions
08:00 – A generation of seasoned professionals is retiring out
10:18 – Part of a familiar trend
12:20 – The influence of project schedule pressure
14:18 – Capabilities of coatings/linings are limited
18:34 – Economic decline brings new contractors into industry
20:04 – Manufacturers as problem solvers and honest brokers
24:11 – Breaking barriers to knowledge sharing
29:35 – Benefits of industry involvement
33:12 – Gaining credibility by saying no
37:57 – Avoid 99% of problems with early collaboration
40:00 – Four questions

19. Electrostatic dissipative (ESD) vs. conductive flooring (Feat. Richie Cropp)

Mon, 18 Nov 2024 18:43:51 -0000

Understanding electrostatic dissipative (ESD) vs. conductive floor coatings is one of the industry’s most persistently misunderstood topics. In this episode of The Red Bucket, subject matter expert Richie Cropp of Dudick discusses the purpose of these specialty products, provides use cases for each type, and explains the critical importance of seeking the knowledge of material manufacturers. Also, Richie shares his plans for Black Friday.

00:00 – Intro
02:27 – This topic is misunderstood
04:05 – How static electricity is generated
08:01 – Resistivity ranges
10:01 – Where does the electricity go?
11:48 – Coating fillers carry the current
12:48 – When to apply conductive vs. dissipative floor coatings
15:45 – The same facility might require both types
17:20 – ESD/conductive coating performance vs. general purpose toppings
19:41 – How coating manufacturers help engineers/specifiers
22:00 – Installed cost comparison
23:28 – Four questions

Find out more at https://carboline-tech-service-podcast.pinecast.co

18. "We don't have it quite right." Modern fire loads (Feat. Chris Burst)

Fri, 11 Oct 2024 18:18:29 -0000

Shortly after the turn of the last century, the cellulosic fire time/temperature curve was developed to assess the performance and safety of building materials and passive fire resistive materials. It was the cutting edge for its time. But, according to Chris Burst, the composition and contents of our built environment today prove its time has run out.

Also in the episode, Toby isn’t sure he’s never seen a ghost, and Chris tells a bad joke.

This episode contains references to a three-part article series we recently published about modern fire loads. Read them here: Part 1. Part 2. Part 3.

00:00 – Introduction
01:07 – What we mean by "modern"
05:04 – Old, old standards
06:03 – Proliferation of rechargeable batteries
07:18 – Visualizing time/temperature curves
12:24 – These fires are harder to extinguish
15:24 – Structured parking complicates matters
20:26– Don't blame EVs
22:27– Similarities to tunnel fires
24:35– Leveraging existing alternatives
26:12– Ramifications of adopting code changes
30:53– Modern spaces require modern material safety testing
32:53– The four questions: Spooky Halloween edition

Find out more at https://carboline-tech-service-podcast.pinecast.co

17. Coatings as sustainability (Feat. Kristen Blankenship)

Wed, 25 Sep 2024 13:47:46 -0000

Kristen Blankenship discusses whether coatings manufacturers can truly impact product sustainability – minus the greenwashing. Then, we learn whether she sees molecules The Queen’s Gambit style.

00:00 – Introduction
02:16 – The purpose of protective coatings
04:27 – When sustainability impacts coatings
08:00 – Addressing pollution as a chemical company
18:47 – Water-based coating claims
32:56 – Where do we go from here?
36:47 – Kristen's four questions

Find out more at https://carboline-tech-service-podcast.pinecast.co

16. Deconstructing Carbomastic 15 - Pt. 2 (Feat. Dan Baribault and Paul Atzemis)

Fri, 23 Aug 2024 17:21:30 -0000

Dan Baribault and Paul Atzemis continue their exploration of the unique technology and wide range of use cases for surface-tolerant epoxy mastics like Carbomastic 15. Then, Paul likens himself to a cross between Rapunzel and Gandalf.

00:00 – Carbomastic 15 performs at high temperatures
01:43 – Summarizing recent Carbomastic 15 use cases
04:00 – Understanding curing shrinkage stress
08:16 – The good (and bad) of slow dry times
10:17 – Importance of low solvent load
12:55 – Dan’s weirdest Carbomastic 15 experience
13:58 – Advice to owners/specifiers comparing surface-tolerant epoxy mastics
15:16 – Paul’s four questions

15. Deconstructing Carbomastic 15 - Pt. 1 (Feat. Dan Baribault and Paul Atzemis)

Thu, 01 Aug 2024 17:40:00 -0000

Why do some surface-tolerant mastic epoxies work so well in so many different services? Paul Atzemis and Dan Baribault deconstruct Carbomastic 15, explaining why its resin technology and added pigmentation combine to make it one of the industry’s best performers. And, Dan imagines a walk along the Lake Pontchartrain Causeway.

00:00 – Introduction
02:19 – How mastic coatings developed
04:39 – Length of carbon chains influence application characteristics
07:29 – Introduction and characteristics of aluminum pigmentation
13:39 – Galvanic protective effects
15:29 – Aluminum pigmentation effect of chalking of epoxy
17:20 – What owners/specifiers need to know
19:15 – The four questions

14. "You're about to watch magic." Controlling inflow & infiltration (Feat. Jeremy Sukola and David Dingler)

Tue, 25 Jun 2024 14:50:00 -0000

Inflow & infiltration (I&I) is a serious challenge to water and wastewater infrastructure owners, who usually don’t know they have an I&I problem until it’s too late. What is I&I? What does it cost? How do you stop it? How does controlling I&I fit into a holistic asset management and maintenance program? Jeremy Sukola and David Dingler of Prime Resins, a division of Carboline, explain. Spoiler: magic in a cup.

Want to schedule a demo? Contact Prime Resins here, or Carboline here.

0:00 – Introduction
03:23 – Defining I&I
05:49 – It doesn’t only afflict aging infrastructure
08:39 – Calculating the cost of I&I
12:12 – Proactive or reactive? Some owners can only triage
13:46 – Where Prime Resins fits in
16:44 – Owners need to update master specs, and we can help
23:14 – Building up the contractor pool with demos and education
26:40 – The four questions

13. EV facility intumescent applicator overcomes record-breaking rainfall (Feat. Jeffrey Lagendyk)

Thu, 23 May 2024 08:00:00 -0000

After some time off the air, The Red Bucket returns with a narration of a complex electric vehicle (EV) facility construction project in Canada, with Jeffrey Lagendyk of Nor-Lag Coatings helping tell the story. The project included applying intumescent fireproofing under tight deadline pressure in foul weather. Paul introduces a new voice to the podcast.

00:00 – Intro
03:10 – Setting the scene in Becancour, Quebec
05:55 – Record-breaking rain
08:05 – Immediate impacts to application schedule
09:08 – Ripple effects
11:50 – Benefits of single-component application
13:08 – Qualities of Thermo-Sorb VOC
14:24 – A hybrid shop + field application approach is ideal for fast-track EV facility construction
18:19 – Ways applicators are valuable resources during pre-construction
20:25 – Did Nor-Lag finish on time?
21:59 – The four questions (non-technical)
26:11 – Closing remarks

12. Soluble Salts (Feat. Ken Rossy)

Tue, 17 Oct 2023 20:59:47 -0000

Controlling soluble salts is one of the largest challenges faced during the surface preparation portion of a coating project. Failure to remove soluble salts can drastically shorten a coating’s lifecycle. On this episode, Ken Rossy, President of HoldTight, joins us to discuss the differences between atmospheric and immersion services, the debate on allowable soluble salt limits, and how additives can help. All of this and more coming up next on The Red Bucket.

0:00 - Intro
1:36 - Introduction to Kon Rossy
3:17 - Introduction to HoldTight Solutions
6:34 - Why are Salts Detrimental to Steel?
8:38 - “Invisible” Contaminants and How to Find Them
13:18 - Cleanliness in Immersion and Atmospheric Service
19:51 - The Debate on the Amount of Allowable Soluble Salts
25:59 - Using Additives to Remove Salts and Hold Cleanliness
35:46 - "The Four Questions" [Non-Technical]
39:54 - "Tech Tips"
40:21 - Closing Remarks

11. Abrasive Blasting (Feat. Pete Mitchell)

Tue, 15 Aug 2023 05:03:25 -0000

On this episode of The Red Bucket, Pete Mitchell from GMA Garnet joins us as we explore the various factors of abrasive blasting that contribute to long-term coating performance. The industry has focused on cleanliness and profile for years, but a new study suggests that peak density could be the largest contributing factor. We talk about all of that and more coming up next on The Red Bucket.

0:00 - Intro
2:33 - Introduction to Pete Mitchell
4:39 - Introduction to GMA Garnet
6:08 - The Advantages of Garnet as an Abrasive Blast Media
9:36 - Friability
15:58 - Blast Cleanliness vs. Profile
22:40 - Density vs. Depth
28:51 - What Engineers and Specifiers Need to Know About Abrasives
35:08 - "The Four Questions" [Non-Technical]
38:00 - "Tech Tips"
39:16 - Closing Remarks

10. Coating Concrete - Pt. 2 (Feat. Paul Kennington)

Tue, 18 Jul 2023 07:58:00 -0000

Previously on The Red Bucket, we began our exploration into all things concrete with our friend and AMPP Instructor, Paul Kennington. This month, we continue our conversation with Paul, discussing moisture effects, inspection, testing standards, and when to coat the concrete. All of that and more are coming up next on The Red Bucket.

0:00 - Intro
0:58 - Moisture and Concrete
6:02 - ASTM F1869: The Calcium Chloride Test
9:03 - ASTM F2170: The in situ Humidity Probes Test
13:08 - Visually Inspecting Concrete
17:26 - CSP Standards
20:18 - When to Coat Concrete
23:50 - "The Four Questions" [Non-Technical]
26:04 - "Tech Tips"
26:45 - Closing Remarks

9. Coating Concrete - Pt. 1 (Feat. Paul Kennington)

Tue, 20 Jun 2023 07:33:00 -0000

It's been said that if you want to have problems, coat concrete. But if you know the intricacies of the concrete and the surrounding environment, the job should go smoothly. Join us this week for part one of our talk with Paul Kennington, AMPP Instructor and Coatings Consultant, about concrete. All of that and more are coming up next on The Red Bucket.

0:00 - Intro and Introduction to Paul Kennington
3:17 - Concrete: The Enemy of Coatings
4:29 - What Makes Up Concrete?
6:31 - The Different Types of Concrete
9:39 - Type 1 Concrete
10:26 - Type 2 Concrete
12:07 - Type 3 Concrete
16:50 - Vapor Barriers
17:54 - Type 4 Concrete
19:01 - Type 5 Concrete
22:05 - The Cure Mechanism (Pt. 1)
22:51 - Concrete vs. Cement
24:12 - The Cure Mechanism (Pt. 2)
32:14 - Closing Remarks

8. The Impact of Geography on a Coating Project (Feat. Matt Morris)

Tue, 16 May 2023 07:52:00 -0000

We all know that environmental factors affect a coating project. But it's important to remember how diverse geographic locations can complicate those factors. Today, we talk with Matt Morris of Gulf States Protective Coatings about these challenges and the impact that have on an applicator's day-to-day business. All of that and more are coming up next on The Red Bucket.

0:00 - Intro
2:04 - Introduction to Matt Morris
4:03 - Introduction to Gulf States Protective Coatings
4:49 - Painting Tanks in a Coastal Environment
6:57 - Wind Complications on a Coating Project
9:32 - Shrouding and Salts
14:44 - Surface Preparation for Different Areas in a Tank
19:25 - Crow's Nests and Complex Angles in Storage Tanks
24:26 - Elastomeric Coatings: The Best Friend of a Bolted Ground Storage Tank
25:45 - Elastomeric Coatings vs. Epoxy Coatings
29:32 - "The Four Questions" [Non-Technical]
33:04 - "Tech Tips"
33:57 - Closing Remarks

7. Corrosion Under Insulation (Feat. Michael Pardo)

Tue, 18 Apr 2023 07:28:00 -0000

During this episode, we discuss CUI, its true meaning, and the various factors that influence corrosion with our good friend, Michael Pardo of S&B Engineers & Constructors. We also touch on the value that mentorships bring to the coatings industry. All of that and more coming up next on The Red Bucket.

0:00 - Intro
1:45 - Introduction to Michael Pardo
3:56 - The Importance of Mentors in the Protective Coatings Industry
6:23 - Why Michael Stayed in Coatings
9:39 - Introduction to S&B Engineers and Constructors
10:00 - Corrosion Under Insulation
13:05 - What Does "CUI" Mean?
18:43 - Factors that Impact the Design of Insulation and Fireproofing Systems
22:06 - What Coating Types to Use to Protect Steel
23:16 - Additional Factors that Impact the Design of a System
27:39 - The Importance of a Maintenance Plan
29:05 - The Cost of Corrosion
30:06 - Coating Specifications for Partially Insulated Assets
32:17 - "The Four Questions" [Non-Technical]
35:41 - "Tech Tips"
36:18 - Closing Remarks

6. The Complexities of Painting Elevated Water Tanks (Feat. Steve Birchmeier)

Tue, 21 Mar 2023 09:00:00 -0000

Elevated water tank painters face several unique challenges every day when working on the job site. The intricacies of a coatings project become exponential, and safety becomes even more paramount when crews are several hundred feet in the air. During this episode, we will talk with Steve Birchmeier, owner of Semper Fi Industrial Coatings, about the success of such projects. All of that and more coming up next on The Red Bucket.

0:00 - Intro
1:38 - Introduction to Steve Birchmeier and Semper Fi Industrial Coatings
3:59 - The First Step in the Elevated Water Tank Coating Process
5:32 - Surface Preparation Considerations for Elevated Water Tanks
7:13 - Containment for Elevated Water Tank Exteriors
8:18 - Spray Applications vs. Brush and Roll
10:02 - Creative Designs on Elevated Water Tank Exteriors
10:49 - Primers and Intermediate Coats
12:22 - Adjustments for Elevated Water Tank Applications
14:47 - Coating Applications for Elevated Water Tank Interiors
17:52 - What Can Go Wrong When Painting Elevated Water Tanks?
18:52 - Holding Conditions Inside Water Tanks
20:08 - Safety Considerations for Painting Elevated Water Tanks
23:27 - Mechanical Repairs and Welding on Elevated Water Tank Projects
24:30 - Specifications for Elevated Water Tank Projects
27:11 - Travel Requirements for Elevated Water Tank Painters
28:16 - "The Four Questions" [Non-Technical]
30:48 - "Tech Tips"
31:36 - Closing Remarks

5. Understanding Coating Additives (Feat. Ron Brashear)

Tue, 21 Feb 2023 08:59:00 -0000

On this episode of The Red Bucket, we are joined by Ron Brashear of BYK – a global supplier of specialty chemicals and additives. Together we discuss the chemistry behind additives and their use in the paint formulation process. We also cover how additives can be designed to help the coating perform to the end user's specifications. All of that and more coming up next on The Red Bucket.

0:00 - Intro
1:36 - Introduction to Ron Brashear and BYK
5:22 - The Role Additives Play in Coating Formulations
9:14 - Wetting and Dispersing Additives
13:52 - The Relationship Between Coating Manufacturers and Additives Suppliers [Part 1]
16:39 - Surface Additives
20:59 - Flow Additives
24:30 - Defoamers
27:34 - Anti-Corrosive Pigments
30:04 - The Relationship Between Coating Manufacturers and Additives Suppliers [Part 2]
33:50 - The Misnomer That It's All the Same Thing in the Bucket
35:30 - "The Four Questions" [Non-Technical]
36:54 - "Tech Tips"
37:54 - Closing Remarks

4. Coating Applications in Varying Service Environments (Feat. Tanner Brooks)

Tue, 17 Jan 2023 09:04:00 -0000

This week on The Red Bucket, we are joined by Tanner Brooks of Peak Industrial Coatings & Linings. We discuss the subtle differences of applying a diverse range of industrial coatings in varying types of facilities. Join us as we cover the challenges associated with coating technologies and service environments. All of that and more coming up next on The Red Bucket.

0:00 - Intro
1:28 - Introduction to Tanner Brooks and Peak Industrial Coatings & Linings
4:32 - Working in Diverse Markets
9:16 - The Importance of Education in the Coatings Industry
10:07 - Surface Preparation and Providing Value
12:09 - Applying Coatings Without Causing Facility Downtime
14:43 - Tanner's Favorite Industries to Work In
15:28 - The Challenges of New Construction
17:41 - Secondary Containment Applications
20:04 - Tank Lining Applications
21:55 - Unique Challenges in the Coatings Industry
23:07 - Writing Specifications
25:00 - Saponification
26:24 - Why It's Not Just Paint
28:14 - Safety Considerations in the Coatings Industry
29:15 - "The Four Questions" [Non-Technical]
31:28 - "Tech Tips"
32:28 - Closing Remarks

3. Renewables & Coatings (Feat. Marcus Foston)

Tue, 20 Dec 2022 08:59:00 -0000

Joining us on The Red Bucket is Dr. Marcus Foston of Washington University in St. Louis, Missouri. In our discussion with Dr. Foston, we look forward to the future of the coatings industry. We examine the various renewable raw materials that could impact our industry, what they are, why we chose them, and how they are used. All of that and more on The Red Bucket.

0:00 - Intro
1:06 - Introduction to Dr. Marcus Foston & Washington University’s Energy, Environmental & Chemical Engineering Department
3:57 - Renewables
8:28 - How Coatings Can Go Green
11:03 - Vegetable Oils for Use in Coatings
12:34 - Waste Feedstocks
13:40 - How to Go Green by Changing the Parts
14:41 - The Challenge of Going Green in a Large-Scale, Commercially-Viable Way
16:53 - What is Lignin, and How Can It Be Used in Coatings?
21:43 - Renewables in Fire-Retardant Coatings
27:36 - Cellulose in Coatings
28:58 - How the Coatings Industry and Academia Can Help Each Other
31:04 - "The Four Questions" [Non-Technical]
36:26 - "Tech Tips"
36:51 - Closing Remarks

2. Resinous Flooring Systems for Cannabis Facilities (Feat. Michael Greenblatt)

Tue, 15 Nov 2022 08:59:00 -0000

Due to changing laws and regulations, the cannabis industry has seen massive growth in the last several years. This growth has led to major capital investments and new construction as producers look to build new facilities in which to produce cannabis. During this next episode, we talk about all the factors that are needed to make a good resinous flooring recommendation for one of these facilities. All this and more coming up next on The Red Bucket.

0:00 - Intro
1:38 - Introduction to Michael Greenblatt and Surface Technology
2:48 - The Cannabis Industry and Its Similarities to the Pharmaceutical and Food and Beverage Industries
5:43 - The Construction Process Knowledge Gaps in the Cannabis Industry
8:06 - Regulatory Challenges in the Cannabis Industy
10:55 - Why You Shouldn't Just Buy a Flooring System off the Shelf
12:26 - Security Regulations on Projects in the Cannabis Industry
14:54 - The Requirements for Cleanroom Floors and Walls
15:57 - The Benefits of Resinous Floor and Wall Systems
18:06 - Floor and Wall System Recommendations for Cannabis Facilities
20:23 - The Benefits of Urethane Cement
22:07 - Urethane Cement vs. Epoxy Mortars
23:17 - The Importance of Using a Qualified Flooring Installer
24:24 - Chemical Resistance Requirements in a Cannabis Facility
27:14 - The Importance of Reflective and Light-Colored Flooring in a Cannabis Growing Facility
30:18 - Why You Shouldn't Leave Concrete Bare
33:18 - The Future of the Cannabis Industry
36:07 - "The Four Questions" [Non-Technical]
39:20 - Closing Remarks
40:35 - "Tech Tips"

1. Coating Inspections and Drones (Feat. Drayton Adkins)

Tue, 18 Oct 2022 08:00:00 -0000

Have you ever wondered what the role of a coating inspector is and why they are essential to a successful coatings project? Are you interested in the tools that an inspector uses and the advancements that have been made through technological innovation? Have you wondered how drones are being used to not only increase the speed of inspections but also increase safety for workers? The answers to all that and more are coming up next on The Red Bucket.

0:00 - Introduction to The Red Bucket: A Protective Coatings Podcast
4:42 - Introduction to Drayton Adkins and Team Bulwark
6:29 - Drayton’s connection to Carboline
10:14 - What Does “Coating Inspection” Mean?
12:09 - What are the Best Practices for Coating Inspections?
15:17 - The Inspector’s Gadgets: Type One Gauge
18:30 - The Inspector’s Gadgets: Type Two Gauge
19:58 - Why a Coatings Inspector Must Understand the Vocabulary
22:57 - The Inspector’s Gadgets: Sling Psychrometer
25:12 - The Inspector’s Gadgets: Digital Hygrometers
27:35 - The Inspector’s Gadgets: Surface Preparation Tools
31:55 - The Inspector’s Gadgets: Drones
37:43 - Drone Technical Report
41:00- The Drone Infrastructure Inspection Act
43:52 - "The Four Questions" [Non-Technical]
46:49 - Introduction to "Tech Tips"
47:53 - "Tech Tips"
48:20 - Outro

CTSP Bonus Episode - A Conversation with Chris Tiernay

Mon, 16 May 2022 08:27:00 -0000

Carboline's President and Chief Operating Officer, Chris Tiernay, joins Jack and Paul to discuss the company's past, present, and future in this very special episode. Oh, and the trio also announce the podcast's new name and direction!

0:00 - Intro
1:00 - Introduction to Chris Tiernay
2:00 - Carboline’s history
4:23 - Raw materials and supply chain
7:05 - Carboline’s future
11:53 - The future of The Tech Service Podcast
14:48 - Outro

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 200 - A Look Back...

Mon, 14 Feb 2022 08:52:00 -0000

In this special episode of the Carboline Tech Service Podcast, Jack and Paul celebrate reaching 200 episodes by taking a look back at some of the on-air highs (and lows) throughout the past few years.

0:00 – Intro 2:05 – Highlight #1: Shooting Jim Rippe out of a cannon 5:53 – Highlight #2: Galvanizing vs. inorganic zinc 9:03 – Highlight #3: The spheres are pretty 9:58 – Highlight #4: The differences between fire protection standards 12:35 – Highlight #5: Alien acid and baked phenolics 13:50 – Highlight #6: AWWA D102 - Inside coating systems 17:59 – Highlight #7: A voicemail from HR 19:27 – Highlight #8: CUI and ISO 19277 22:08 – Closing thoughts 23:22 – Highlight #9: A voicemail from EHS

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 199 - Specifications Pt. 3: An Engineer's Perspective

Mon, 31 Jan 2022 09:45:00 -0000

Cortney Chalifoux, PhD, PE, PCS, Coatings Program Manager at Pond & Company, joins Jack and Paul to close out their series on specifications. They discuss the significance of having the right specification and explore what engineers see as the most crucial part of a specification (SPOILER ALERT: It's the whole thing).

0:00 – Intro and important announcement 1:53 – Introduction to Cortney Chalifoux and Pond Engineering 3:27 – Why specifications are necessary 4:32 – Why following the proper specification is critical 5:24 – The most important part of a specification for engineers 6:28 – The general portion of a specification 7:00 – The products portion of a specification 8:37 – The execution portion of a specification 9:33 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 198 - Specifications Pt. 2: A Contractor's Perspective

Mon, 17 Jan 2022 09:30:00 -0000

Kevin Kipp, Co-Owner, Project Manager, and Estimator at Hardig Industrial Services, joins Jack and Paul to weigh in on their ongoing discussion on specifications. They explore the process of matching contractors with projects and products based on their competencies and the importance of talking through specifications during pre-job conferences.

0:00 – Intro 1:03 – Introduction to Kevin Kipp and Hardig Industrial Services 2:31 – What contractors look for in specifications 4:41 – Frequent issues with specifications 6:37 – The importance of contractor selection based on specifications 8:57 – Matching contractors with products 10:21 – Standards and training protocols for contractors 12:47 – The importance of pre-job conferences 15:06 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 197 - Specifications Pt. 1: A Manufacturer's Perspective

Mon, 03 Jan 2022 09:00:00 -0000

Jeremy Sukola is back to cover the basics of specification writing with Jack and Paul. They discuss the three primary parts of a specification and the benefits of including manufacturers in the writing process.

0:00 - Intro
3:01 - The main authority for specification writing
4:20 - The three parts of a specification
4:58 - Specification Part 1: General & scope of work
7:01 - How improper specifications impact coatings
8:02 - The 4 C's of writing a specification
8:53 - Specification Part 2: Products
13:08 - The value of including manufacturers in the specification writing process
14:05 - Specification Part 3: Execution
17:01 - Wrap up

CTSP Episode 196 - CarboNext

Mon, 20 Dec 2021 09:00:00 -0000

Vice President of Marketing Melissa Molitor joins Jack and Paul to discuss Carboline’s new young professionals' program, CarboNext. The trio explores the need for more education and networking opportunities for young professionals in the corrosion industry and how CarboNext can be a valuable resource.

0:00 – Intro
1:15 – Intro to CarboNext
1:52 – Why we started CarboNext
3:03 – Carboline’s dedication to education
3:38 – The need for programs like CarboNext
4:42 – How to get involved in CarboNext
6:04 – How CarboNext is different from other programs
6:59 – CarboNext on LinkedIn
7:38 – CarboNext at trade shows
8:34 – More exciting Carboline marketing news
10:03 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 195 - Saturated Surface Dry (SSD)

Mon, 06 Dec 2021 09:00:00 -0000

Carboline Market Manager - Water & Wastewater, Jeremy Sukola joins Jack and Paul to discuss saturated surface dry (SSD). The trio discusses the factors that make SSD crucial to a successful concrete resurfacing job.

0:00 - Intro
1:10 - The definition of Saturated Surface Dry (SSD)
2:00 - Why SSD is essential to a concrete coatings project
3:20 - Clarification on coatings that require SSD
4:40 - The science behind SSD
8:10 - Project factors that drive SSD
9:51 - Onsite testing for SSD
11:05 - Natural or accidental achievement of SSD
13:06 - Summary

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 194 - Corrosion in the Water Sector: Key Resources & Future Outlook

Mon, 22 Nov 2021 13:26:25 -0000

Brian Cheshire joins Jack and Paul to discuss the challenges facing the water and wastewater industries today. They discuss the current status of infrastructure and the large investment that was just passed by the federal government.

CTSP Episode 193 - Incredible Intumescent Case History

Mon, 08 Nov 2021 09:00:00 -0000

Cabot Wilkinson and Dwayne Lum of Carboline join Jack and Paul to discuss a recent discovery about one of our legacy products. Listen as they discuss what makes this fireproofing project so unique.

0:00 – Intro
2:30 – Dwayne Lum and Cabot Wilkinson
3:45 – Introduction to the fireproofing project
6:00 – Service environment concerns
10:45 – The product
11:45 – Testing to validate the product’s performance
16:00 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 192 - The Use of Drones in the Coating Industry

Mon, 25 Oct 2021 08:00:00 -0000

The CEO of Apellix Robotics, Robert Dahlstrom, joins Jack and Paul to discuss how drones make a difference in the coatings industry. The trio discusses the latest advancements in drone technology as it refers to coatings.

0:00 – Intro
2:00 – Introduction to Apellix Robotics
3:00 – Safety advantages of drone use
4:30 – Drones versus jobs
6:10 – How do drones measure dry film thickness?
10:10 – Data, data, and more data
11:20 – Inspection versus paint application through drone robotics
15:00 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 191 - Carboline Canada Expansion

Mon, 11 Oct 2021 08:36:00 -0000

Russ Nakoneshny, the Director of Canada for Carboline, joins Paul Atzemis and Jack Walker to discuss Carboline's expansion for Canada. The trio explores the changes and discusses ideal candidates for new open positions.

0:00 – Intro
1:30 – Changes on how Carboline conducts business in Canada
4:45 – Staffing challenges
7:45 – Industrial coatings growth in Canada and the ideal Carboline Canada Sales candidate
10:15 – Other openings as a part of the Canada expansion
12:30 – Wrap Up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 190 - Corrosion Causes & Coatings for Midstream Oil & Gas

Mon, 27 Sep 2021 07:54:00 -0000

Holly Tyler of SPC and Doug Sinitiere of Carboline join Paul and Jack to discuss corrosion causes and coating solutions for Midstream Oil and Gas assets. They'll discuss pipelines, storage tanks, and more.

0:00 - Intro
2:00 - Part 1 recap
3:50 - Biggest corrosion challenges in pipelines
4:40 - Coating solutions for corrosion challenges in pipelines
6:50 - Corrosion protection for above ground storage tanks
8:00 - Corrosion protection for storage tank roofs
9:00 - Tank ring corrosion protection
10:00 - Coating solutions for spherical storage tanks
11:30 - Corrosion protection for LNG facilities
15:00 - Coating application considerations
18:50 - Coatings for the internals of pipe
20:00 - Coatings for solar panel structures
21:00 - Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 189 - AMPP Update with Bob Chalker (Pt. 2)

Mon, 13 Sep 2021 08:02:00 -0000

A continuation of the discussion about AMPP with CEO Bob Chalker. Make sure to listen to part 1 (Episode 188) before you listen to this episode.

0:00 – Intro and YouTube
2:00 – The FDA Network of Experts
4:00 – The expansion of the industry beyond steel and concrete
5:45 – Involvement in real-life material problems such as the collapsed condo in Florida
7:00 – Naming of industry standards. Will the names change with the new organization?
11:00 – Master Painter’s Institute
12:30 – Wrap up

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 188 - AMPP Update with Bob Chalker (Pt. 1)

Mon, 30 Aug 2021 08:13:00 -0000

The Association of Materials Protection and Performance (AMPP) Chief Executive Officer Bob Chalker joins the guys to talk about the AMPP organization now that the merger is complete. In part one of the discussion, they discuss the significance of the new name and organization.

0:00 – Intro
1:45 – The formation of AMPP
6:15 – Breaking down “the competitor” walls
8:45 – AMPP – The meaning behind the name
10:45 – The rebranding process
15:15 – The AMPP logo
16:45 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 186 - Corrosion Considerations for Water Treatment Plants

Mon, 02 Aug 2021 10:55:52 -0000

Brian Cheshire joins Paul Atzemis and Jack Walker to discuss water treatment facilities. They discuss the treatment process, substrates, and coatings used in these facilities.

1:30 – The difference between water treatment facilities and wastewater treatment facilities
4:00 – History of water treatment for drinking water
5:30 – The water treatment process
7:30 – Chemical treatments in the water purification process
11:00 – Substrates found in water treatment facilities
14:00 – Coatings used in water purification facilities
16:00 – Filter media regeneration
17:30 – Carboline coatings for water treatment facilities
19:30 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 185 - The Effects of Media Selection on Surface Preparation

Mon, 19 Jul 2021 08:00:00 -0000

Pete Mitchell of GMA Garnet joins Jack Walker and Paul Atzemis to discuss the role blast media selection plays in surface cleanliness. They discuss the impact blast media can have on a coatings job.

0:00 – Intro to GMA Garnet and Pete Mitchell
3:00 – Studies on the blast media
4:00 – Garnet as a blast media versus other types of media
6:30 – The importance of friability when selecting blast media
10:00 – The effects of dust due to media and its effect on a coating system
12:00 – The importance of peak density when measuring profile
16:00 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 184 - Midstream Oil & Gas Considerations

Mon, 05 Jul 2021 08:00:00 -0000

Jack Walker and Paul Atzemis are joined by Holly Tyler of SPC and Doug Sinitiere to discuss midstream oil & gas facilities, equipment, and piping. They explore corrosion considerations for this sector of the industry.

0:00 – Intro
2:00 – What is midstream oil & gas?
3:30 – Assets found in midstream oil & gas
4:30 – LNG Plants (liquid natural gas)
5:45 – Pipeline systems
7:00 – Regulations and regulatory bodies to consider
12:00 – Owners and operators in midstream oil & gas
14:45 – Corrosion challenges for midstream oil & gas assets and facilities
19:45 – Pipeline routing

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 182 - Phenalkamine Epoxies

Mon, 07 Jun 2021 08:20:00 -0000

Technical Service Engineer William “Bill-um” Seawell joins Jack Walker and Paul Atzemis to discuss the science behind phenalkamine epoxy coatings. The trio discusses where the phenalkamine coatings are used and the properties that make them an excellent choice for those services.

0:00 – Intro
2:30 – What Is a phenalkamine epoxy?
4:15 – Four factors that differentiate phenalkamine epoxies
7:30 – Moisture tolerance and phenalkamine epoxies
8:30 – Chemical resistance of phenalkamine epoxies
11:30 – Blush resistance of phenalkamine epoxies
13:00 – Summary of physical properties of phenalkamine epoxies
14:15 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 181 - AWWA D102 - Inside Coating Systems

Mon, 24 May 2021 07:54:00 -0000

Carboline Water/Wastewater Market Manager Brian Cheshire joins Jack Walker and Paul Atzemis to discuss the coating systems for the interior of water tanks as outlined by AWWA D102.

0:00 – Intro
2:00 – Review of AWWA D102
4:00 – Overview of interior system requirements per AWWA D102 – Coating Steel Water-Storage Tanks
5:00 – Systems used to coat the interior of water tanks per AWWA D102 – Coating Steel Water-Storage Tanks
9:00 – NSF/ANSI/CAN 600 effects on the systems outlined in AWWA D102
11:00 – Interior dry surfaces versus interior wet surfaces
13:30 – Carboline products used for AWWA D102 internal systems
15:30 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 180 - The Importance of Proven Performance

Mon, 10 May 2021 08:41:00 -0000

Matt McDonald, Director of Sales – Rail for Carboline, joins Jack Walker and Paul Atzemis to discuss important factors when deciding which coating to specify for rail work. They explore the advantages of selecting the right coating the first time.

0:00 – Intro
2:00 – Matt McDonald – Carboline Rail Sales
3:00 – The importance of proven performance
4:15 – The balance of proven performance and innovation
5:45 – The evaluation of coatings for rail exteriors
8:00 – No substitute for field history
9:30 – Cost of service life versus cost per gallon
12:00 – Savings on maintenance and repair by selecting a sustainable coating
14:45 – Tracking coating performance
17:00 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 179 - Corrosion Consideration & Coatings for Upstream Oil & Gas Assets

Mon, 26 Apr 2021 07:51:00 -0000

Carboline Oil & Gas Market Manager Doug Sinitiere joins Jack Walker and Paul Atzemis to discuss corrosion associated with Upstream Oil & Gas Assets and the coatings that protect them.

0:00 – Intro and the new Carboline Tech Service Podcast listener 3:45 – Re-introduction to upstream oil & gas 4:30 – Standards used to specify coatings for upstream oil & gas assets 7:00 – Certifications for fireproofing systems used with upstream oil & gas assets 13:00 – Coatings used for upstream oil & gas assets 19:31 – Wrap Up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 178 - The "Third Side" to a Rail Car

Mon, 12 Apr 2021 08:06:00 -0000

Carboline Rail Sales Rep Joe Foster joins Paul Atzemis and Jack Walker to discuss how jacketed tank cars have a space between the jacket and the tank that requires inspection during the car's maintenance cycle.

0:00 – Intro
2:20 – Joe Foster – Carboline Rail Sales
3:00 – The "third side" of a rail car (tank car)
3:50 – Tank cars
5:00 – Jacketed tank cars and their similarities to coatings under insulation
5:30 – Visual look at the inspection areas
8:30 – Number of inspection points on jacketed tank cars
9:30 – Jacketed versus non-jacketed tank cars
10:00 – Corrosion mechanisms between the jacket and the tank
12:00 – Taking the rail car apart for inspection
12:40 – Coatings used to protect the space between the jacket and the tank on a rail car
15:00 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 177 - AWWA D102 - Outside Coating Systems for Water Tanks

Mon, 29 Mar 2021 08:12:00 -0000

Brian Cheshire joins Jack Walker and Paul Atzemis to discuss the AWWA D102 standard as it relates to coatings for the exterior of water tanks. They discuss factors relating to the industry, coating choice, surface prep, and more.

0:00 - Introduction
3:00 - Brian Cheshire and an introduction to water tanks
7:37 - AWWA D102 – Coating Steel Water-Storage Tanks
9:38 - Outside coating systems (OCS) per AWWA D102
13:44 - Use of fluoropolymers for the exterior coating on water tanks
16:17 - Surface preparation for maintenance systems for coating the exterior of water tanks
19:00 - How to use the AWWA D102 standard
20:37 - Wrap up

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 176 - Common Tests for Coatings in Immersion Service

Mon, 22 Mar 2021 08:25:00 -0000

Carboline Vice President of Research, Development & Innovation Jeff Anderson joins Paul Atzemis and Jack Walker to discuss common testing for coatings designed for immersion service. They examine the methods of testing and the reasoning behind them.

0:00 – Intro
2:00 – What is considered immersion service?
3:15 – Typical testing of coatings for immersion service
4:00 – Typical screening methods for coatings for immersion service
5:54 – NACE TM0174Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials on Metallic Substrates in Immersion Service
8:15 – Coatings used for immersion service
9:00 – Benefits of long-term immersion testing
11:45 – Commodity purity evaluation during immersion testing
13:00 – Additional testing for immersion scenarios that include undissolved solids or high flow
14:30 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 175 - Common Tests for Coatings in Atmospheric Service

Mon, 15 Mar 2021 09:03:00 -0000

Jack Walker and Paul Atzemis discuss common laboratory tests for coatings in atmospheric service. They discuss the definition of atmospheric service and describe some of the various tests.

0:00 – Intro and Paula
3:00 – Definition of atmospheric service
3:45 – CTSP Episode 130 – ISO 12944 Environment Classifications
4:15 – Coating types for atmospheric service
7:00 – Chalking and fading of epoxies in atmospheric service
8:30 – Polyurethanes and polyaspartics in atmospheric service
9:15 – QUV testing of coatings for atmospheric service
12:00 – Salt fog testing for coatings
13:30 – Adhesion testing for coatings
14:30 – Mandrel bend test for coatings
16:00 – Impact and Reverse Impact testing of coatings
17:00 – Natural weather testing
18:45 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 174 - AWWA C210 - Liquid-Epoxy Coatings & Linings for Steel Water Pipe & Fittings

Mon, 08 Mar 2021 08:49:00 -0000

Brian Cheshire joins Paul Atzemis and Jack Walker to discuss AWWA C210. This standard covers liquid-epoxy coatings for steel water pipes and fittings. It is widely used in the water industry and has begun to be used for assets other than steel water pipes.

0:00 - Intro
1:37 - Drinking water infrastructure in the United States
4:29 - Types of steel pipes in the water industry and typical coatings that meet this standard
6:02 - Minimum requirements for AWWA C210
7:11 - Application of coatings per AWWA C210
7:58 - The constructor, the manufacturer, and the purchaser
8:22 - The growth of AWWA C210 and use in AWWA D102
9:07 - Testing requirements for coatings per AWWA C210
11:49 - Quality control measures per AWWA C210
13:44- Real-world example that would benefit from AWWA C210 approved coatings
15:04 - Wrap up

Subscribe via iTunes or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 173 - Oil & Gas Upstream Considerations

Mon, 01 Mar 2021 09:09:00 -0000

Carboline Technical Service Director Paul Atzemis and Jack Walker are joined by Carboline’s Oil & Gas Market Manager Doug Sinitiere to discuss the upstream portion of the Oil & Gas industry. The trio discusses the different aspects of upstream oil and gas while also identifying corrosion factors.

0:00 – Intro
2:15 – What does upstream mean when referring to the oil & gas market
4:00 – Challenges associated with onshore drilling for oil and gas
6:00 – The changing landscape of the oil & gas upstream market
11:00 – Corrosion challenges of offshore oil & gas facilities
15:30 – Corrosion challenges of onshore oil & gas facilities
17:15 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 172 - Technical Service Capabilities

Mon, 22 Feb 2021 09:11:00 -0000

Jack Walker and Paul Atzemis discuss the Carboline Technical Service Department. The two explore all of the services this department provides to the industry. From specification writing and review to applicator training, this department greatly influences the coatings industry.

0:00 – Intro
2:00 – Introduction to the Carboline Technical Service Department
3:30 – Reaching the Carboline Technical Service Department
5:30 – Working on coating specifications with the Carboline Technical Service Department
8:00 – Extent of the Carboline product line
9:45 – The natural checks and balances of the Carboline Technical Service Department
14:00 – How Carboline Technical Service helps applicators through training and job start-ups
18:00 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 171 - Pre-Construction Primers

Mon, 15 Feb 2021 08:17:00 -0000

Jack Walker and Paul Atzemis discuss pre-construction primers. The duo examines what makes them different from other primers, when to use pre-construction primers, and other factors.

0:00 – Intro
2:00 – Pre-construction primers
3:00 – The definition of pre-construction primers
5:00 – The thickness and uniformity of pre-construction primers
7:00 – The role of pre-construction primers in high-performance coating systems
10:00 – The evolution of the use of pre-construction primers
13:00 – Studies on pre-construction primers
14:00 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 170 - SSPC-SP18 - Thorough Spot & Sweep Blast Cleaning for Industrial Maintenance

Mon, 08 Feb 2021 09:00:00 -0000

Senior Tech Service Engineer Dan Baribault joins Paul Atzemis and Jack Walker to discuss the SSPC standard SSPC-SP 18, Thorough Spot and Sweep Blast Cleaning for Industrial Maintenance. The trio discusses the ins and outs of the standard.

0:00 – Intro and the death of a blender
2:25 – SSPC-SP 18 Thorough Spot and Sweep Blast Cleaning for Industrial Maintenance
4:00 – How SSPC-SP 18 differs from the SSPC-SP 10 and SSPC-SP 7 standards
5:10 – The differences between sweep blasting per SSPC-SP 18 versus Brush-off blasting per SSPC-SP 7
6:19 – Requirements prior to the performance of SSPC-SP18
7:07 – Acceptable methods of performing SSPC-SP 18
10:03 – Requirements for cleaning the substrate after abrasive blasting per SSPC-SP 18
12:15 – Existing coating considerations for SSPC-SP 18
14:05 – The use of corrosion inhibitors when performing SSPC-SP18
16:16 – Wrap Up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 169 - Manhole Rehabilitation

Mon, 01 Feb 2021 09:04:00 -0000

Brian Cheshire joins Jack Walker and Paul Atzemis to discuss manhole rehabilitation within wastewater collection systems. The trio discusses factors that cause corrosion and what to do to protect manholes from future corrosion.

0:00 – Intro
1:15 – Manhole Rehabilitation
5:20 – Inflow and infiltration
7:40 – Methods of manhole rehabilitation
11:36 – Testing of coatings for manhole rehabilitation
14:10 – Protective coatings for manhole rehabilitation
15:25 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 168 - Field Analysis of Common Coating Problems

Mon, 25 Jan 2021 12:05:42 -0000

Jack Walker and Paul Atzemis are joined by Tech Service Engineer, William Seawell to discuss the on-site investigation of the types of coating defects discussed over the last 2 weeks.

0:00 – Intro – CTSP on YouTube
1:00 – Introduction of William Seawell
2:12 – Determining if the defect is a bubble or blister on site
4:20 – Identifying pinholes and/or craters on site
6:45 – Identifying cracking phenomena on a job site
10:30 – Localized versus uniform defects across the entire structure
14:02 – Evaluating a tank failure
15:22 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 167 - Alligatoring, Cracking, Checking, Crazing & Mudcracking

Mon, 18 Jan 2021 09:00:00 -0000

Jack Walker and Paul Atzemis continue their discussion on common types of coating defects. This week they explore the different defects that are associated with the cracking of a coating system.

0:00 – Intro
1:15 – Coating defects related to cracks
2:57 – Alligatoring or Crocodiling - Identification, causes, prevention, and treatments
4:19 – Cracking - Identification, causes, prevention, and treatments
6:53 – Checking - Identification, causes, prevention, and treatments
9:39 – Crazing - Identification, causes, prevention, and treatments
11:20 – Mudcracking - Identification, causes, prevention, and treatments
15:55 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 166 - Bubbles, Blisters, Pinholes & Craters

Mon, 11 Jan 2021 09:06:00 -0000

Jack Walker and Paul Atzemis discuss common forms of coating failure. They dissect the differences between the commonly interchanged terms of blisters, bubbles, pinholes, and craters.

0:00 – Intro and the Karate Kid
2:28 – Bubbles, blisters, Pinholes, and Craters
3:11 – Fitz’s Atlas of Coating Defects
4:19 – Pinholes - Identification, causes, prevention, and treatments
6:10 – Cratering - Identification, causes, prevention, and treatments
10:00 – Bubbling - Identification, causes, prevention, and treatments
12:17 – Blisters - Identification, causes, prevention, and treatments
15:22 – Wrap Up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 165 - Coating Ductile Iron

Mon, 04 Jan 2021 09:22:00 -0000

Brian Cheshire joins Jack Walker and Paul Atzemis to discuss coating ductile iron pipe, how it's different from steel, and what standards to use.

0:00 – Intro
1:38 – What makes ductile iron different than steel
2:37 – Ductile iron surface prep requirements
3:30 – Color change when blasting ductile iron pipe and dangers of over-blasting
5:25 – The first three parts of NAPF 500-03 (NAPF 500-03-01 Solvent Cleaning, NAPF 500-03-02 Hand Tool Cleaning, NAPF 500-03-03 Power Tool Cleaning)
7:12 – NAPF 500-03-04 Abrasive Blast Cleaning for Ductile Iron Pipe and NAPF 500-03-05 Abrasive Blast Cleaning for Cast Ductile Iron Fittings
10:27 – Coatings used on ductile iron substrates
12:43 – Lining ductile iron pipe
14:30 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 163 - Fiber-Reinforced Epoxies & Sanitile 755 FR

Mon, 21 Dec 2020 09:05:00 -0000

Jack Walker and Paul Atzemis discuss fiber-reinforced epoxies and where they should be used. They explore the characteristics of the coating and appropriate markets for these products.

0:00 – Intro
2:32 – Fiber-reinforced epoxies
3:13 – Characteristics of fiber-reinforced epoxies
4:04 – Fiber-reinforced epoxies vs mat layup systems
5:10 – Physical properties of fiber-reinforced epoxies
5:40 – FRP wall paneling vs fiber-reinforced epoxies
8:03 – Using fiber-reinforced epoxies in food and beverage facilities
11:45 – Sanitile 755 FR vs a Fastball
12:05 – High impact zones
13:22 – Wrap up

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 162 - Abrasive Blasting of Non-Ferrous Metals

Mon, 14 Dec 2020 09:00:00 -0000

Dan Baribault joins Jack Walker and Paul Atzemis to discuss abrasive blast standards for non-ferrous metals. The trio explores the standards and explains the differences between them.

0:00 – Intro
2:02 – Abrasive blasting standards for non-ferrous metals
2:20 – SSPC SP 16 – Brush- off Blast Cleaning Non-Ferrous Metals
4:09 – Minimum surface profile required by SSPC SP 16
5:05 – Checking for passivating materials on galvanizing
6:19 – Brush-off blasting
7:00 – The importance of de-humidification
8:02 – SSPC SP 17 – Thorough Blast Cleaning of Non-Ferrous Metals
10:35 – The need for a job reference standard (JRS) for SSPC SP 17
13:24 – SSPC SP17 addresses non-visible contaminants
15:04 – Proper abrasives for blasting of stainless steel
16:49 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 161 - Substrates in Wastewaster Treatment Environments

Mon, 07 Dec 2020 08:28:00 -0000

Brian Cheshire joins Paul Atzemis and Jack Walker to discuss substrates found in a wastewater treatment plant. The trio explores the factors associated with the various structures and what to keep in mind when coating them.

0:00 – Intro
2:20 – Substrates in wastewater treatment environments
2:50 – Concrete in wastewater treatment environments
4:50 – Steel in wastewater treatment environments
7:04 – Ductile iron in wastewater treatment environments
8:54 – Non-ferrous metals in wastewater treatment environments
9:40 – PVC and various plastics in wastewater treatment environments
10:53 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 160 - Is a Coating Dry? Or Is It Cured?

Mon, 30 Nov 2020 08:00:00 -0000

Jack Walker and Paul Atzemis discuss the definitions of the varying stages during the curing process of a high-performance coating.

0:00 – An unforgettable mistake
2:55 – Cured coating definition
4:08 – ISO 9117 and ASTM D1640
6:00 – Set to touch
6:55 – Dry to touch
9:00 – Dry Hard versus Dry to Handle/Dry Through
11:07 – Dry to recoat
12:56 – How to determine the cure of a high-performance coating
16:20 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 159 - How to Treat Expansion Joints & Other Complexities within Secondary Containment Coating Systems

Mon, 23 Nov 2020 09:00:00 -0000

Jack Walker and Paul Atzemis discuss the final aspects of sound secondary containment coating systems. They explore pipe penetrations, equipment footings, expansion joints, control joints, and how to stay in compliance with EPA regulations through coating system design.

0:00 – Intro
1:18 – Secondary Containment and CTSP Episode 151
1:35 – Additional considerations for secondary containment design
3:18 – Why flexible coatings are needed to complete a secondary containment system
4:40 – Flexible coating technology types used to compliment secondary containment systems
6:54 – Areas within secondary containment that require flexible coatings
7:30 – Treatment for equipment footings, pipe penetrations, etc.
7:58 – Treatment for expansion joints and control joints
8:16 – Vehicular traffic expansion/control joint treatment for secondary containment systems
9:50 – Proper backer rod depth and two-sided adhesion
11:14 – Importance of bond-breaker tape
13:35 - Foot traffic only expansion/control joint treatment for secondary containment systems
14:30 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 158 - Waterjet Cleaning

Mon, 16 Nov 2020 09:00:00 -0000

Jack Walker and Paul Atzemis are joined by the Rajin’ Cajun Senior Technical Service Engineer Dan Baribault to discuss waterjet cleaning standards. The guys discuss industry standards related to the practice and good practices associated with waterjet cleaning.

0:00 – Intro
1:10 – Waterjet cleaning
3:55 – Waterjet cleaning standards
5:00 – Differences between low-pressure cleaning and high-pressure waterjet cleaning
8:50 - NACE/SSPC WJ-1 – Waterjetting to Bare Substrate
9:20 – NACE/SSPC WJ-2 – Very Thorough Waterjetting
10:39 – NACE/SSPC WJ-3 – Thorough Waterjetting
11:40 – NACE/SSPC WJ-4 – Light Waterjetting
13:00 – Flash rusting associated with waterjet cleaning
16:34 – SSPC VIS-4/NACE VIS-7
17:00 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 157 - Spray Equipment Guidelines

Mon, 09 Nov 2020 09:00:00 -0000

Carboline Senior Technical Service Engineer Dan Baribault joins Paul Atzemis and Jack Walker to discuss the basics of spay application for coatings. The trio focus on the factors that help make an effective spray pump recommendation.

0:00 – Intro – Dan Baribault Carboline Technical Service Engineer
1:42 – Viscosity of industrial coatings
2:28 – 5 major factors for selecting spray equipment for industrial coatings
2:55 – Spray pressure, fluid to air ratio, and gallons per minute
7:39 – Temperature effects on coating application
10:53 – The results related to hose size during coating application
13:46 – How spray-tip size effects coating application

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 156 - Coating Technology Used for Water Tank Exteriors

Mon, 02 Nov 2020 09:10:00 -0000

Brian Cheshire joins Jack Walker and Paul Atzemis to discuss the challenges of coating water tank exteriors. They explore the resin technology used for topcoats and the features that make them different.

0:00 – Intro and feeling old
3:22- Coating technology used for coating the exterior of water tanks
3:51 – AWWA D102 – Coating Steel Water Tanks
5:33 – Polyurethane technology used on water tank exteriors
6:58 – Polyurethane clear coats used for water tank exterior
9:50 – Why service life matter with coatings on water tank exteriors
12:11 – Fluoropolymers used for water tank exteriors
15:02 – Polysiloxanes used for water tank exteriors
18:20 – Wrap Up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 155 - How to Coat Pitting Corrosion of Steel

Mon, 26 Oct 2020 08:34:00 -0000

Jack Walker and Paul Atzemis discuss the challenges associated with coating pitted steel. They examine the factors that cause these challenges and the requirements to coat pitted steel successfully.

0:00 – Intro – Podcast joke struggle
3:07 – Pitting corrosion associated with steel tank re-lining projects
3:50 – Pitting corrosion cell
4:25 – Problems created by pitting corrosion for coating systems
5:25 – The first step of re-lining a tank
7:39 – Difficulty cleaning pitted steel
8:16 – Reasons for the difficulty of coating pitted steel
10:15 – Reasons for filling pits flush to the surface of the steel
10:50 – Surface prep of pitted steel before the application of a coating system
13:03 – Coating requirements for coatings designed for pitted steel
14:58 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 154 - The Science of Hydrostatic Pressure & Concrete Structures

Mon, 19 Oct 2020 07:18:00 -0000

Jack Walker and Paul Atzemis discuss the science of hydrostatic pressure and how it relates to high-performance coating systems. They also compare moisture vapor transmission to hydrostatic pressure.

0:00 – Intro
0:32 – Hydrostatic pressure versus moisture vapor transmission
1:42 – The definition of hydrostatic pressure
2:36 – Areas where hydrostatic pressure and moisture vapor transmission are of concern
3:24 – Specialty coatings required for hydrostatic pressure and coatings for moisture vapor transmission
5:21 – A real-world example of hydrostatic pressure
8:37 – Review of hydrostatic pressure properties
10:12 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 153 - Galvanizing vs. Zinc-Rich Coatings

Mon, 12 Oct 2020 06:57:00 -0000

Jack Walker and Paul Atzemis discuss the different aspects of protecting steel with zinc. They discuss how galvanizing and zinc-rich coatings are similar, how they differ, and when appropriate to use each.

0:00 – Intro
1:42 – Galvanizing and zinc-rich coatings
2:29 – Why we compare galvanizing and zinc-rich coatings
3:47 – “The Munger Book” – Corrosion Prevention by Protective Coatings
Corrosion Protection by Protective Coatings
4:54 – The Corrosion Cell
6:37 – The chemical differences between inorganic zinc-rich coatings and galvanizing
8:10 – The installation process of inorganic zinc-rich coatings
9:28 - The installation process of galvanizing
10:31 – Where galvanizing makes sense
11:38 – One of the significant reasons to use inorganic zinc-rich coatings over galvanizing
14:08 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 152 - Coating Technology Used in Wastewater Treatment Systems

Mon, 05 Oct 2020 08:11:00 -0000

Carboline Wastewater Market Manager Brian Cheshire joins Paul Atzemis and Jack Walker to discuss coating technologies used in wastewater treatment systems. They discuss epoxy, polyurethane, and polyurea coatings.

0:00 – Intro
2:00 – Brian Cheshire
3:27 – WEFTEC Connect
5:00 – Corrosion causes throughout wastewater systems
5:38 – Coating technology used within a wastewater treatment system
6:56 – Epoxy coatings used in wastewater treatment systems
9:00 – Aromatic hybrid polyurethane coatings used in wastewater treatment systems
11:09 – Polyurea coatings used in wastewater treatment systems
13:58 – Carboline coatings that are good for wastewater treatment systems
15:22 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 151 - Secondary Containment Coating Systems

Mon, 28 Sep 2020 07:58:00 -0000

Jack Walker and Paul Atzemis discuss the design of secondary containment coating systems. The duo discuss neat-coat systems, aggregate-filled systems, and aggregate-filled reinforced systems and the generic types of coatings used to compose these systems.

0:00 – Intro
1:00 – Tech Service Chat and email address
1:53 – Secondary containment coating systems
3:20 – Epoxy, novolac epoxy, and vinyl ester coatings for secondary containment
7:06 – Neat coat coating systems for secondary containment
7:39 – Aggregate-filled coating systems for secondary containment
9:05 – Broadcasted aggregate versus blended aggregate in aggregate-filled coating systems for secondary containment
10:25 – Aggregate-filled reinforced coating systems for secondary containment
13:25 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP - Episode 150 - Choosing a Fireproofing Coating

Mon, 21 Sep 2020 08:30:00 -0000

Carboline Technical Service Engineer Chris Burst joins the guys to discuss the process of making a passive fire protection product recommendation. They discuss the different types of passive fire protection coatings and when to use an intumescent or a cementitious product.

0:00 – Intro
1:19 – Introduction to Technical Service Engineer Chris Burst
2:32 – Making a passive fire protection coating recommendation
3:27 – Information required to make a passive fire protection coating recommendation
4:25 – Types of passive fire protection coatings, Intumescent and Cementitious
4:49 – Hourly fire protection ratings and factors that determine the required rating
8:58 – How an excellent passive fire protection material specification can save the end-user money throughout a project
11:07 – Identifying passive fire protection coatings in the real world
12:20 – Reasons to pick an intumescent fireproofing product versus a cementitious fireproofing product
13:52 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 149 - New Technology for Fire Tubes on Upstream Oil & Gas Process Vessels

Mon, 14 Sep 2020 08:47:00 -0000

Jack Walker and Paul Atzemis discuss a brand new technology brought to you by Carboline, Supoxy based coatings. The duo discusses the latest technology while introducing the first product in the line: Plasite XHT 400, designed to coat fire tubes on upstream process vessels. Paul and Jack also explain how fire tubes work and why coating them is challenging.

0:00 – Intro and second takes
1:25 – The goal of the Carboline Tech Service Podacst
2:16 – The new Supoxy technology and Plasite XHT 400
3:30 – Fire tubes in upstream oil and gas process vessels
4:50 – Phase separation within upstream oil and gas process vessels
6:15 – Gas phase within the upstream oil and gas process vessels
7:02 – Steam coil heating versus fire tube heating
8:33 – The development of Plasite HT 400
10:29 – Application benefits of Supoxy technology
11:17 – A different way to think about being “greener” with coatings
12:17 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 148 - The Value of Third Party Coating Inspection

Mon, 07 Sep 2020 08:28:00 -0000

Jack Walker and Paul Atzemis are joined by new Carboline Technical Service Engineer Blayn Drew. Before joining Carboline, Blayn was a coating inspection. Listen in as the guys have an honest chat about the value of third-party coating inspection.

0:00 – Intro
2:38 – Introduction to Technical Service Engineer Blayn Drew
3:30 – The role of the coating inspector
5:14 – The removal of bias
6:40 – Holding firm to the specification
8:48 – Contractor benefits of having 3rd party coating inspection
9:30 – Importance of good working relationships between the coating inspector and the applicator
10:20 – How the coating inspector helps with potential changes to the specification
11:15 – How the coating inspector helps ensure the entended service life
12:20 – The value of the coating inspector’s experience
13:50 – Liability when a coating inspector is involved
15:40 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 147 - SSPC Technology Guide 27

Mon, 31 Aug 2020 08:00:00 -0000

Brian Cheshire joins Jack Walker and Paul Atzemis to discuss SSPC Technology Guide 27 - Recommended Performance Properties for Liquid-Applied Organic Polymeric Coatings and Linings for Concrete Structures in Municipal Wastewater Facilities. Listen as the trio discuss the factors that challenge coating systems in a wastewater treatment plant.

0:00 – Intro
0:51 – Brian Cheshire and Chumbawumba
3:10 – SSPC Technology Guide 27¬¬ – Recommended Performance Properties for Liquid-Applied Organic Polymeric Coatings and Linings for Concrete Structures in Municipal Wastewater Facilities
http://shop.sspc.org/ST-000G27
4:56 – Collection systems - Manholes, interceptors, lift stations
5:20 – Hydrogen sulfide gas, methane gas present in the headspace challenges to concrete and coating systems
5:52 – Biogenic sulfide corrosion, commonly known as microbial induced corrosion (MIC)
7:00 – Hydrogen sulfide becomes sulfuric acid due to microbial induced corrosion within wastewater systems
9:22 – Assets constructed of concrete within a wastewater treatment plant
10:01 – The Clean Water Act and MIC
10:25 – Factors that make a coating suitable for wastewater collection systems
10:58 – Unintended consequences associated with regulations
12:54 – Preliminary wastewater treatment systems and considerations for coating systems
15:05 – Primary wastewater treatment systems and considerations for coating systems
16:54 – The aggressive environment found in wastewater treatment systems
18:00 – Testing protocol outlined in SSPC Technology Guide 27 to identify coating systems for concrete in wastewater treatment
20:10 – ASTM G210 - Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
https://www.astm.org/Standards/G210.htm
21:30 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 146 - Moisture Content Tests for Concrete

Mon, 24 Aug 2020 06:51:00 -0000

Jack Walker and Paul Atzemis discuss the moisture content tests used in the coatings industry. The duo also discusses the importance of these tests and the phenomenon that requires them to be performed.

0:00 - Intro- concrete and the weather
2:51 – Surface preparation of concrete
3:45 – Moisture vapor tests for concrete before the application of coating systems
5:03 – The science behind moisture vapor transmission
7:07 – The importance of performing these tests in conditioned space
8:12 - NACE No. 6/SSPC-SP 13, Surface Preparation of Concrete
https://store.nace.org/nace-no-6-sspc-13-surface-preparation-of-concrete-2
8:31 – The three approved moisture content tests per NACE No. 6/SSPC-SP 13
11:30 – ASTM D4263 - Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
https://www.astm.org/Standards/D4263.htm
13:19 – ASTM F1869 - Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
https://www.astm.org/Standards/F1869.htm
16:58 – ASTM F2170 - Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
https://www.astm.org/Standards/F2170.htm
20:15 – Wrap U

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 145 - Secondary Containment Design & Coating Systems

Mon, 17 Aug 2020 08:34:00 -0000

Jack Walker and Paul Atzemis discuss the many factors of secondary containment design and the construction of coating systems for secondary containment.

0:00 – Intro and the AER Podcast
https://air-equipment.com/podcast
2:38 – Secondary containment coating systems
3:15 – EPA Spill Prevention, Control, and Countermeasure (SPCC) Guidance for Regional Inspectors – Chapter 4
https://www.epa.gov/oil-spills-prevention-and-preparedness-regulations/spill-prevention-control-and-countermeasure-6
4:48 – Goal of Secondary containment systems
4:56 – Secondary containment design considerations
5:16 – Treatment of expansion joints, cold joints, cracks, pipe penetrations, and more with elastomeric coatings
6:12 – Vehicular traffic in secondary containment areas
7:40 – Slope away from primary containment
8:31 – How big does the secondary containment area have to be?
10:11 – The secondary design has to account for rainfall
11:07 – The 72-hour rule
12:40 – Coating system design for secondary containment
15:05 – Neat coating systems for secondary containment
16:41 – Aggregate-filled coating systems for secondary containment
18:08 – Aggregate-reinforced coating systems for secondary containment
20:00 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 144 - AWWA C222 - Polyurethane Coatings & Linings for Steel Water Pipe & Fittings

Mon, 10 Aug 2020 08:46:00 -0000

Jack Walker and Paul Atzemis discuss the AWWA C222 standard. This standard relates to the use of polyurethanes and polyurea for the interior and exterior of steel water pipe, valves, and fittings.

0:00 - Intro
3:39 - Introduction to AWWA C222 - Polyurethane Coatings and Linings for Steel Water Pipe and Fittings
4:40 - AWWA C222 for the exterior of steel pipe
5:44 - History of polyurethane use within the AWWA C222 standard
6:53 - Use of polyurethanes for the interior of water pipes
8:03 - NSF/ANSI/CAN 600 - Health Effects Evaluation and Criteria for Chemicals in Drinking Water
9:31 - Chemical resistance required per AWWA C222
10:45 - Repairs of the polyurethane coating per AWWA C222
11:36 - Performance requirements per AWWA C222
14:16 - Wrap up

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 143 - Coatings Under Insulation & ISO 19277

Mon, 03 Aug 2020 08:49:00 -0000

Jack Walker and Paul Atzemis discuss coatings under insulation in the petroleum, petrochemical and natural gas industries by exploring the standard ISO 19277.

0:00 – Intro and the crutch
1:48 – The element of surprise
2:03 – Coatings Under Insulation – NACE SP 0198 “Control of Corrosion Under Thermal Insulation and Fireproofing Materials—A Systems Approach”
https://store.nace.org/sp0198-2016
2:37 – ISO 19277 – “Petroleum, Petrochemical And Natural Gas Industries - Qualification Testing And Acceptance Criteria For Protective Coating Systems Under Insulation”
3:10 – Temperature categories of CUI 1-3
4:56 – Cryogenic classes per ISO 19277
5:40 – Immersion and salt spray testing per ISO 19277
6:55 – ISO 4628 “Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance”
9:37 – Thermal cycle testing per ISO 19277
11:16 – Dry and wet cyclic testing per ISO 19277
12:28 – NACE SP0198 differences from ISO 19277
15:33 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 142 - ASTM E84 vs. ASTM E119

Mon, 27 Jul 2020 08:10:00 -0000

Sean Younger joins Jack Walker and Paul Atzemis to discuss the differences between standards ASTM E84 and ASTM E119. The two standards are readily used in the fireproofing industry, listen as they discuss the critical factors of these two standards.

0:00 – Intro and technical difficulties
1:54 – Kidnapping the CFO
2:51 – Reintroduction to Sean Younger, Carboline Fireproofing Sales
3:21 – ASTM E84 and ASTM E119
3:56 – ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials
https://www.astm.org/Standards/E84.htm
5:00 – ASTM E119 - Standard Test Methods for Fire Tests of Building Construction and Materials
https://www.astm.org/search/fullsite-search.html?query=e119&
5:28 – Fire protection versus flame spread
6:30 – Flame spread index per ASTM E84
7:18 – Flame index categories per ASTM E84
7:51 – Compartmentalization of fire
9:03 – Smoke index per ASTM E84
10:38 – ASTM E84 does not give products hourly fire ratings
11:37 – ASTM E119 testing
12:26 – Differences between ASTM E84 and ASTM E119
13:23 – Importance of full-scale testing for fire resistance ratings per ASTM E119
14:01 – Differences between full-scale testing and small-scale screening
17:37 – UL and NFPA tests that mirror ASTM E84 and ASTM E119
18:08 – Critical temperature for ASTM E119
19:18 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 141 - Common Standards & Their Differences

Mon, 20 Jul 2020 08:20:00 -0000

Jack Walker and Paul Atzemis discuss some common standards and common misconceptions related to those standards, and how they are different from each other.

0:00 – Intro
1:40 – Standards, regulations, and policies
2:57 – FDA (Food and Drug Administration) approved linings
3:49 – USDA (United States Department of Agriculture) approved coatings
5:00 – FDA 21 CFR 175.300 – Resinous Polymers and Coatings

https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/CFRSearch.cfm?fr=175.300

6:46 – NSF/ANSI 61 – Drinking Water Systems Components

https://webstore.ansi.org/Standards/NSF/NSFANSI612017?gclid=CjwKCAjwmMX4BRAAEiwA-zM4JsQ9VlSwYXM-gTzS7uxrSMXPLD6VdO5pAaWlMpPr6xHm-4K_gpFtMRoCa_gQAvD_BwE

8:28 – Surface area to volume calculation
9:00 – Temperature constraints
9:50 – AWWA D102 - Coating Steel Water Storage Tanks

https://webstore.ansi.org/standards/awwa/awwad100d102d103steelwater?gclid=CjwKCAjwmMX4BRAAEiwA-zM4JlwdPNquDMkXLLssZnBOa_mk1a_JFsS54RRbtMB_3I2k4YhDgnJ7QxoCeB4QAvD_BwE

12:00 – AWWA C210 - Liquid Epoxy Coating Systems For The Interior & Exterior Of Steel Water Pipelines

https://webstore.ansi.org/standards/awwa/awwac21007?gclid=CjwKCAjwmMX4BRAAEiwA-zM4JmeQK2A_Kch2JDXlw_MFR-ILtZfSlvdJswhbtFcipieKbpGZilJ1UhoCZqMQAvD_BwE

12:30 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 140 - Exterior Coatings for Rail Cars

Mon, 13 Jul 2020 08:22:00 -0000

Jack Walker and Paul Atzemis are joined by Carboline Rail Salesman Joe Foster. They discuss all the factors associated with the selection of exterior coatings for rail cars, from benefits of the different coating technologies to factors that are important to shops and rail car owners.

0:00 Audience of one
1:13 The van
2:00 Introduction to Joe Foster, Carboline Rail Sales \
2:51 Selecting an exterior coating for rail cars (hopper cars, tank cars, etc.)
3:04 History of coating technologies and their use in the rail car industry
3:51 – VOC restrictions high solids epoxies
4:39 – The rail car stamp
6:15 – The rail shop perspective and advantages of high solids epoxies
8:26 – Familiarity with a coating can increase throughput
10:33 – The rail car owner and coatings
10:59 – Technology matters, things to remember when comparing the price of different coating technologies
11:58 – Longevity and cycle importance of rail car coatings
13:29 - Lining up painting schedule with maintenance schedule
14:22 – The importance of tracking your coatings and their performance
16:00 – 20-year-old rail car with high solids epoxy
17:42 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 139 - Choosing a Rail Tank Car Lining

Mon, 06 Jul 2020 08:34:00 -0000

Jack Walker and Paul Atzemis are joined by Matt McDonald, Carboline's Director of Sales for the rail industry. The trio discusses the process of selecting a lining for a rail tank car, and problems that are associated with incorrect lining selection.

0:00 – Thirteen feet
1:55 – Intro to Matt McDonald – Director of Sales - Rail
2:08 – Matt dodges the odds
4:00 – The decision-making process for rail tank car linings
5:40 – Why do we line rail tank cars?
6:14 – Protecting the asset (rail car) from corrosion
7:07 – Product or cargo purity
7:23 – Regulatory compliance with Federal Railroad Association
9:08 – The information required to make a recommendation for a rail tank car lining
10:58 – Additional special factors for tank car recommendations
11:26 – YOU SAID HOW MANY TESTS?!?!?
13:00 – Conservative verse risk-averse
13:30 – Cost of lining failure with a rail tank car
15:32 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 138 - How NSF/ANSI 600 Changes the Industry

Mon, 29 Jun 2020 08:34:00 -0000

Brian Cheshire joins Jack Walker and Paul Atzemis to discuss changes coming to the coatings industry due to NSF/ANSI 600. The trio discusses how the standard changes the water tank industry.

0:00 - Intro & Murdoch update
2:31 - Introduction to Brian Cheshire
3:32 - All the memberships
4:10 - NSF/ANSI 61 Drinking water system components - Health effects
6:05 - NSF/ANSI 600 Health Effects Evaluation and Criteria for Chemicals in Drinking Water
6:42 - Reduction of allowable solvents in coating formulation
9:20 - Solvent-based epoxies and water tanks
9:47 - 100% solids epoxy and hybrid polyurethane coatings
10:39 - Benefits of 100% solids epoxy and hybrid polyurethane coatings
11:14 - Service life of coatings
12:04 - Development of 100% solids epoxy for beneficial application characteristics
13:39 - How the new NSF standard changes the coatings industry
15:03 - Wrap up

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 137 - Coatings Under Insulation & Evolution of the Standard Practices

Mon, 22 Jun 2020 07:47:00 -0000

Paul Atzemis and Jack Walker discuss the evolution of coatings under insulation. They explore the early practices and what is commonly performed today.

0:00 Intro
1:07 Creative topic selection
2:05 Coatings under insulation, the beginning
3:16 Coatings under insulation compared to immersion service
3:45 The effects of heat, oxygen, and moisture on the corrosion of assets under insulation
4:00 The early adoption of inorganic zinc in the 1980s for CUI
4:40 NACE study of CUI
5:42 NACE study eliminates inorganic zinc as an option for CUI due to polarity reversal
6:58 Salt effects on zinc polarity reversal
7:47 Fireproofing and its similarity to insulation
9:25 The introduction of NACE SP0198

https://store.nace.org/sp0198-2016
11:06 Wrap up

Subscribe via iTunes, Google Play, or

Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 136 - Thick-film & Thin-Film Coating Systems

Mon, 15 Jun 2020 08:40:00 -0000

Jack Walker and Paul Atzemis discuss the factors in choosing a thick-film coating system versus choosing a thin-film coating system. Abrasion, flexibility, substrates, and application equipment are all discussed.

0:00 Paul’s curveball
3:15 Coating recommendation categories
3:52 Thick film coating systems and thin-film coating systems
5:12 Substrate can determine coating system
7:09 Pitted storage tanks
7:32 High-solids coatings
8:52 Abrasion conditions effects on coating system selection
9:48 Flexibility and impact resistance
11:06 Scheduling effects on coating system selection
12:02 UV effects on coating system selection
13:44 Availability of application equipment effect on coating system selection
15:24 Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 135 - Cost of Coatings (Pt. 5) - Per Gallon Price vs. Applied Cost

Mon, 08 Jun 2020 07:48:00 -0000

Jack Walker and Paul Atzemis continue their discussion on cost considerations for coatings projects. They discuss the differences between applied cost and price per gallon.

0:00 – Murdoch and the Room
1:35 – Alexa plays the podcast
3:15 – Coverage of coatings
4:11 – Per gallon cost
5:05 – Nail polish versus acrylic paint cost
7:10 – Solids by volume effects on coverage
7:50 – Mil/feet2 per gallon
9:00 – Standard coverage considerations
10:45 – Per gallon price versus coverage cost
12:30 – Coating thickness effect on coverage cost
13: 20 – Review of coverage formula
15:05 – Surface profile effects on coverage
17:26 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 134 - Cost of Coatings (Pt. 4) - Immersion Grade Linings

Mon, 01 Jun 2020 07:55:00 -0000

Jack Walker and Paul Atzemis continue their exploration in the costs of coatings projects. This week the duo explores immersion grade linings and the factors that affect their value. They explore everything from coal tar epoxies to 100% solids polyurethane linings.

0:00 – Intro – Murdoch and the Helicopter
1:15 – Cost of Coatings – Immersion Linings
2:30 – NACE Paper 10673 – Expected Service Life and Cost Considerations for Maintenance and New
3:51 – Coal Tar Epoxy and High-Solids Epoxy Linings
5:00 – Think film versus thin film linings
6:20 – AWWA D210 Inside systems
8:00 – 100% solids linings (epoxies, novolacs, and polyurethanes)
9:17 – Commodity cycle effects on the service life of the lining
10:36 – Applied cost versus per gallon cost of 100% solids linings
11:34 – Vinyl ester and polyester linings
12:50 – Factors that affect the service life of linings
13:25 – Wrap up

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 133 - Cost of Coatings (Pt. 3) - Coating Systems

Mon, 25 May 2020 07:00:01 -0000

Jack Walker and Paul Atzemis continue their discussion about the Cost of Coatings. They explore how coating systems are designed, and how that could affect the cost. They compare systems to the standard zinc, epoxy, urethane system.

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 132 - Cost of Coatings (Pt. 2) - Polyurethanes, Polyaspartics, Siloxanes & More

Mon, 18 May 2020 06:47:00 -0000

Jack Walker and Paul Atzemis continue their exploration into the cost of different coating technology. This week the duo focuses on topcoats as they explore polyurethanes, siloxanes, polyureas, and more.

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 131 - Cost of Coatings (Pt. 1) - Alkyds, Acrylics, Epoxies & More

Mon, 11 May 2020 12:52:32 -0000

Jack Walker and Paul Atzemis begin to discuss the cost of different coating technologies. The duo compares the cost associated with a coating technology and the expected life cycle from that technology.

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 130 - ISO 12944 Environment Classifications

Mon, 04 May 2020 11:59:08 -0000

Jack Walker and Paul Atzemis continue their exploration into the factors that affect costs with industrial coatings projects. In this episode, Paul and Jack explore the environment classification of ISO 12944 and discuss how this standard is used relates to evaluating coating technology.

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 129 - Comparing Coating Technology Through Testing

Mon, 27 Apr 2020 08:20:00 -0000

Jack Walker and Paul Atzemis continue their exploration into the cost of coatings projects. They review ASTM B117 as a standard of coating evaluation as they begin to compare coating technology.

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 128 - Cost Considerations for Coatings Projects - Surface Prep

Mon, 20 Apr 2020 07:02:00 -0000

Jack Walker and Paul Atzemis begin a series discussing the different factors that can influence the cost of a coatings project. The duo begins with a look at surface preparation and the factors that drive cost during this portion of a high-performance coatings project.

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 127 - Key Factors of Slip Critical Connection Ratings

Mon, 13 Apr 2020 07:41:00 -0000

Jack Walker and Paul Atzemis discuss slip critical connections and how coating selection affects slip critical connections. The pair also discuss the testing of coatings for this specialty service.

Subscribe via iTunes, Google Play, or Spotify.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 126 - The Four Essential Elements of an Exceptional Coating Selection

Mon, 06 Apr 2020 07:34:00 -0000

Jack Walker and Paul Atzemis discuss a topic that they have hinted at for 125 episodes. Paul and Jack give you the why behind the coating selection process as they explore an over-arching theme of the show in depth.

CTSP Episode 125 - Chris Tiernay on Carboline + COVID 19

Mon, 30 Mar 2020 07:57:00 -0000

Jack Walker and Paul Atzemis are joined by Carboline President Chris Tiernay to discuss Carboline and COVID 19. The trio discusses the current status of Carboline and of the things to come soon.

CTSP Episode 124 - Joe Walker & New Dry Film Thickness Measurement Technology

Mon, 23 Mar 2020 09:00:00 -0000

Joe Walker (no relation), of Elcometer, stops by the Carboline booth at SSPC Coatings + to discuss advancements in dry film thickness measurement technology with Jack Walker and Paul Atzemis. The trio discusses scanning technology gauges and factory calibrated gauges.

CTSP Episode 123 - Adhesion Values

Mon, 16 Mar 2020 10:41:04 -0000

Jack Walker and Paul Atzemis discuss adhesion values and what they mean. How do we get maximum adhesion and how low should be acceptable. Originally released 11/26/18.

CTSP Episode 122 - All the Zinc

Mon, 09 Mar 2020 12:51:51 -0000

Bernardo Duran of the International Zinc Association stops by to discuss the use of zinc for corrosion control with Jack Walker and Paul Atzemis. The trio explores the different method zinc is deployed for corrosion control. Recorded live on 2/4/20 at Coatings + 2020.

CTSP Episode 121 - Crude Oil Storage Tanks

Mon, 02 Mar 2020 10:03:00 -0000

Kyle Smith stops by SSPC Coatings + to discuss the lining of crude oil storage tanks with Jack Walker and Paul Atzemis. They discuss the challenges and remedies for this challenging service. Recorded live at SSPC Coatings + on 2/5/20.

CTSP Episode 120 - New SSPC Concrete Standards

Mon, 24 Feb 2020 09:04:00 -0000

Dustin Young of SSPC joins Jack Walker and Paul Atzemis to discuss new concrete standards from SSPC. The trio discusses the new concrete abrasive blasting standards SSPC CAB 1-3. Also, they talk about the new surface texture standard for resinous flooring SSPC CTS-1.

CTSP Episode 119 - NACE & SSPC Merger Update

Mon, 17 Feb 2020 08:46:17 -0000

Jack Walker and Paul Atzemis are joined by the Executive Director of NACE Bob Chalker and the Executive Director of SSPC Bill Worms to discuss the ongoing merger talks between NACE and SSPC. Listen as the two give a timely update and cover topics from board composition to standards. Recorded live in front of a studio audience at SSPC Coatings + on 2/6/20.

CTSP Episode 117 - Solvent & Water Based Intumescent Coatings

Mon, 03 Feb 2020 09:00:00 -0000

Paul Atzemis and Jack Walker welcome Sean Younger back to the show. The trio discusses the differences between solvent and water-based intumescent coatings. They cover the advantages and disadvantages of both and the importance of being able to offer both solvent and water-based intumescent coatings.

CTSP Episode 116 - Surface Tolerant Coatings

Mon, 27 Jan 2020 08:39:00 -0000

Jack Walker and Paul Atzemis take a shot and talk about talk dirt. They discuss Surface Tolerant Coatings, their meanings, and when and where to apply them. They discuss surface cleanliness and its effects on coatings and how to manage expectations. Original release date 5/21/18.

CTSP Episode 115 - Inorganic Zincs Pt. 2: The Carbozinc 11 Series

Mon, 20 Jan 2020 08:20:00 -0000

Jack Walker and Paul Atzemis continue their coverage of Inorganic Zinc and dive into the Carbozinc 11 series, specifically Carbozinc 11; Carbozinc 11 FC; and Carbozinc 11 HS. This is the second in the series of Zinc related topics. In this episode, they cover the performance properties and case histories of the Carbozinc 11 series of products. Originally published 3/5/18.

CTSP Episode 114 - Inorganic Zincs Pt. 1

Mon, 13 Jan 2020 08:56:00 -0000

Jack Walker and Paul Atzemis dive into the topic of Inorganic Zinc and the Carbozinc 11 series. This episode is the first in the series of Zinc related topics. In this episode, they present the overall background for the reasons and benefits of using Inorganic Zinc to prevent corrosion. Originally aired 2/26/18.

CTSP Episode 113 - SFRM Part 2

Mon, 06 Jan 2020 09:35:00 -0000

Jack Walker and Paul Atzemis have Sean Younger in the studio for Part 2 of the discussion of Carboline's SFRM materials, Southwest Type 5 and Type 7 lines. They expand on the difference between gypsum and Portland cement-based materials and when and where to use them. Original airdate 3/26/18.

CTSP Episode 112 - SFRM Again

Mon, 30 Dec 2019 09:00:00 -0000

Jack Walker and Paul Atzemis have Sean Younger in the studio to discuss Carboline's SFRM materials. Learn about the difference between gypsum and portland cement-based materials. Original air-date 3/19/18.

CTSP Episode 110 - Water Storage Tanks

Mon, 16 Dec 2019 09:37:00 -0000

Jack Walker and Paul Atzemis discuss water storage tanks. Listen as they cover corrosion causes and remedies of these structures.

CTSP Episode 109 - Wastewater Treatment Pt. 6

Mon, 09 Dec 2019 09:07:00 -0000

Paul Atzemis and Jack Walker finally put the wastewater treatment series behind them. They wrap up the series with a discussion about the coating concerns and solutions for ancillary plant areas. Paul and Jack also summarize the series until this point.

CTSP Episode 108 - Wastewater Treatment Pt. 5

Mon, 02 Dec 2019 09:34:00 -0000

Jack Walker and Paul Atzemis continue their exploration of the water treatment process. They discuss the storage of chemicals onsite at water treatment plants. The two discuss typical coating solutions for the storage tank linings and surrounding secondary containment areas.

CTSP Episode 107 - Wastewater Treatment Pt. 4

Mon, 25 Nov 2019 09:00:00 -0000

Jack Walker and Paul Atzemis continue their look at the water treatment process and the coatings required for asset protection. This week Paul and Jack are joined by the Godfather himself, Anthony Grigsby. Anthony is an engineering sales rep for Carboline, who focuses on the water and wastewater markets.

CTSP Episode 106 - Wastewater Treatment Pt. 3

Mon, 18 Nov 2019 10:00:00 -0000

Jack Walker and Paul Atzemis continue their exploration of the water treatment process. In this episode, they specifically look at the collection and transmission systems of the untreated wastewater. They discuss the proper coating systems for each system.

CTSP Episode 105 - Wastewater Treatment Pt. 2

Mon, 11 Nov 2019 10:00:00 -0000

Jack Walker and Paul Atzemis explore SSPC Technology Guide No. 27, thanks to the one and only Jim Kunkle. This guide explores the corrosive properties of the wastewater systems aimed specifically at concrete. Jack thinks he is funny, and Paul can't handle it.

CTSP Episode 104 - Wastewater Treatment Pt. 1

Mon, 04 Nov 2019 08:43:00 -0000

Jack Walker and Paul Atzemis begin a series on coatings for wastewater treatment. In this first episode, Paul and Jack give an overview of the water treatment process. They also discuss another podcast milestone.

CTSP Episode 103 - Dissimilar Metals

Mon, 28 Oct 2019 07:00:35 -0000

Jack Walker and Paul Atzemis talk about differences in metals. They discuss the chemical process that happens with dissimilar metals.

CTSP Episode 102 - Competitive Crossovers

Mon, 21 Oct 2019 07:00:47 -0000

Jack Walker and Paul Atzemis discuss the process of making a competitive crossover for specifications. They talk about what is important to know and compare between products. Oh yeah, they are in a new studio with some great new options as well. Stay tuned for future experiments.

CTSP Episode 101 - Cold Weather Painting Tips

Mon, 14 Oct 2019 07:00:30 -0000

Jack Walker and Paul Atzemis start the second century with a discussion about cold weather painting. They discuss tips, tricks, and warnings about painting in the winter.

CTSP Episode 100 - Celebration Episode with many guests

Mon, 07 Oct 2019 07:00:17 -0000

Jack Walker and Paul Atzemis hit the century mark with the CTSP! They are joined by serveral guests and play many of the congratulations messages from supporters. Jack and Paul want to give a big "Thank You" to all the fans and listeners.

CTSP Episode 099 - Testing, ASTM B117, Steve Liebhart

Mon, 30 Sep 2019 07:00:50 -0000

Jack Walker and Paul Atzemis bring Carboline Testing Lab Manager Steve Liebhart, in to help the discussion about ASTM B117 and what it really means. The trio discuss the value of the test and how to apply it.

CTSP Episode 098 - Tank Lining Chemistry

Mon, 23 Sep 2019 07:00:39 -0000

Jack Walker and Paul Atzemis are joined by Dr. Absolutely (listen for the bell) Chris Fenoli, PhD as they continue the discussion in the tank lining series. In this episode they discuss the chemistry of coatings and linings.

CTSP Episode 097 - Choosing a Tank Lining with Billum

Mon, 16 Sep 2019 07:00:26 -0000

Jack Walker and Paul Atzemis are joined by Technical Service Engineer and analytical chemist, William (Billum) Seawell as they begin the discussion of choosing a tank lining. In this episode they present the types of information required from the owner, specifier, or applicator prior to choosing the lining.

CTSP Episode 096 - Blast Media Summary

Mon, 09 Sep 2019 07:00:00 -0000

Jack Walker and Paul Atzemis bring the blast media series to an end. The discuss the highlights of the last 7 episodes of the CTSP with some comparisons of when to choose each type of blast media.

CTSP Episode 095 - Sponge Jet, Ted Valoria

Mon, 02 Sep 2019 07:00:59 -0000

Jack Walker and Paul Atzemis talk with Ted Valoria of Spongejet. The guys have a great discussion about the benefits of sponge abrasive media.

CTSP Episode 094 - Abrasives Continued with Jake Wren of Surface Prep Supply

Mon, 26 Aug 2019 07:00:06 -0000

Jack Walker and Paul Atzemis chat with Jake Wren, General Manager at Surface Prep Supply. They talk about what it takes to pick the right abrasives and some of the many options available at SPS.

CTSP Episode 093 - Near-White Metal vs. White Metal Surface Prep (Revisited)

Mon, 19 Aug 2019 07:00:05 -0000

Jack Walker and Paul Atzemis re-evaluate the discussion from a previous episode about SSPC-SP5/NACE No 1 vs SSPC-SP10/NACE No 2. What is really possible vs. what is practical on a jobsite.

CTSP Episode 092 - Metallic Blast Media explained

Mon, 12 Aug 2019 07:00:01 -0000

Jack Walker and Paul Atzemis discuss the differences between shot and grit. They cover the when and why you would choose each and the pros and cons of each type.

CTSP Episode 091 - Abrasive Blasting Standards Review with Dan Baribault

Mon, 05 Aug 2019 07:00:44 -0000

Jack Walker and Paul Atzemis are joined by Carboline Tech Service's own, Dan Baribault. The guys revisit a discussion about abrasive blast standards.

CTSP Episode 090 - Blasting Part 2, Cold Jet, Dry Ice Blasting

Mon, 29 Jul 2019 07:00:05 -0000

Jack Walker and Paul Atzemis move to Part 2 of their abrasive blast discussion. In this one, they talk with Cold Jet about dry ice blasting and equipment. Visit coldjet.com for additional information on dry ice blasting.

CTSP Episode 089 - Blast Media overview

Mon, 22 Jul 2019 07:00:02 -0000

Jack Walker and Paul Atzemis dive into abrasive blast types and standards. They open up a multi-episode series to cover many of the options.

CTSP Episode 088 - Polyaspartic technology explained

Mon, 15 Jul 2019 07:00:17 -0000

Jack Walker and Paul Atzemis get back to the mics and talk Polyaspartic technology. They discuss the benefits and difficulties of this type of coating and its typical uses.

CTSP Episode 087 - Cathodic Protection, Bass Engineering

Mon, 08 Jul 2019 07:00:09 -0000

Jack Walker and Paul Atzemis interview Jarret Brelsford of Bass Engineering to talk about Cathodic Protection. Bass Engineering designs and installs CP systems.

CTSP Episode 086 - Hy-Flex Fireproofing pumps

Mon, 01 Jul 2019 07:00:17 -0000

Jack Walker and Paul Atzemis meet with Allen Mills. Allen is the President of Hy-Flex Corporation. They work with industrial pumps, mixers, and spray equipment and have been a long time supporter for Carboline Fireproofing.

CTSP Episode 085 - Robots painting welds, Gus Garza, CRC-Evans

Mon, 24 Jun 2019 07:00:13 -0000

Jack Walker and Paul Atzemis get to talk about Robots! The guys sit down with Gus Garza with CRC Evans Automatic Welding. They talk about the new developments in automation in coating, welding, and pipeline repair and installation.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 084 - International growth, Jim Kunkle, Juan Caballero, SSPC Coatings+ 2019

Mon, 17 Jun 2019 07:00:49 -0000

Blues Win the Stanley Cup! (Sorry Scott) The wheels stay on the bus and Jack Walker and Paul Atzemis are re-joined by a long time supporter and 2nd time guest, Jim Kunkle. Jim is the Business Development Manager for SSPC and specializes in Central and South America. With him, is Juan Caballero. Juan was recently elected to SSPC's Board of Governors as the International Representative.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 083 - Mike Tabb, Carboline Survey

Mon, 10 Jun 2019 07:00:54 -0000

Jack Walker and Paul Atzemis interview Mike Tabb. Mike leads Carboline's survey program. The trio talks about what it takes to perform a survey at a chemical facility and what benefits it will give to the owner and maintenance groups.

CTSP Episode 082 - NACE Education, Corrosion 2019

Mon, 03 Jun 2019 07:00:10 -0000

Jack Walker and Paul Atzemis talk education with NACE. They interview Melanie Diaz (Sr Manager, Education Bus.Development) and Pam Nicoletti (Director of Education). The group talks about the current offerings and future options for NACE's educational opportunities.

CTSP Episode 081 - BYK Additives, Ronald Brashear, Coatings 2019

Mon, 27 May 2019 07:00:24 -0000

Jack Walker and Paul Atzemis are joined by Ronald Brashear. Ron is the End Use Manager for Protective Coatings Additives in North America for BYK. The guys discuss the role of dispersing agents in coating formulation.

CTSP Episode 080 - Elcometer, Christopher Platt, Dry Film Thickness Testing

Mon, 20 May 2019 07:00:00 -0000

Jack Walker and Paul Atzemis bring in the JV support to answer a listener question. They are joined by Christopher Platt of Elcometer to discuss dry film thickness testing and how early is too early.

CTSP Episode 079 - MBX Bristle Blaster, Andy Steinmann, SSPC Coatings+ 2019

Mon, 13 May 2019 07:00:47 -0000

Jack Walker and Paul Atzemis talk with Andy Steinmann from Corrosion Specialties. The guys got together at SSPC Coating+ 2019 to talk about surface prep and the MBX Bristle Blaster from Montipower.

CTSP Episode 078 - Jenna Hazelrigg, Headwall Photonics, Corrosion 2019

Mon, 06 May 2019 07:00:51 -0000

Jack Walker and Paul Atzemis put in extra hours for this interview with Jenna Hazelrigg of Headwall Photonics. They discuss the future and current offerings of drones in the coatings industry. What they can do now and what is on the horizon. As a reminder, don't forget to vote for Dwayne Meyer for SSPC Board of Governors during the month of May 2019

CTSP Episode 077 - Graco, Corrosion 2019

Mon, 29 Apr 2019 07:00:45 -0000

Jack Walker and Paul Atzemis talk plural spray equipment with Graco's Business Development Manager for PC equipment, Eric Rennerfeldt. The guys discuss spray equipment design and new offerings from Graco.

CTSP Episode 076 - BlastOne, Coatings+ 2019

Mon, 22 Apr 2019 07:00:15 -0000

Jack Walker and Paul Atzemis sit down with BlastOne at SSPC Coatings+. The guys talk with Graeme Thomas, Innovation and Technology Director and Brad Gooden, Vice President of BlastOne. The group discusses equipment, blasting, safety, training, and robots.

CTSP Episode 075 - Life Expectancy of Coatings, Corrosion 2019

Mon, 15 Apr 2019 07:00:08 -0000

Jack Walker and Paul Atzemis discuss how long a coating system should last. They discuss the conditions that effect the service life of coatings and how to improve that life cycle.

CTSP Episode 074 - Bob Chalker (NACE) and Bill Worms (SSPC)

Mon, 08 Apr 2019 07:00:15 -0000

Jack Walker and Paul Atzemis interview Bill Worms (Executive Director of SSPC) and Bob Chalker (CEO of NACE). The discussion centers around the big announcement of the investigation into synergistic opportunities in which the two organizations can work together or join efforts. They talk about what lies ahead for these two organizations.

CTSP Episode 073 - Bullard, safety, silica, Coatings+ 2019

Mon, 01 Apr 2019 07:00:42 -0000

Jack Walker and Paul Atzemis interview Wells Bullard, CEO of Bullard, and her team. The group discusses the history of Bullard, the invention of the modern hard hat, silica safety and much more. They also announce the first giveaway as part of the CTSP.

CTSP Episode 072 - Brion Palmer, PaintSquare, JPCL, Coatings+ 2019

Mon, 25 Mar 2019 07:00:03 -0000

Jack Walker and Paul Atzemis continue their interviews at SSPC Coatings+ 2019. They are joined by the CEO of Technology Publishing Corporation Brion Palmer. Brion's company is the publishing company for JPCL, PaintSquare, PaintSquare Press, and Durability and Design to name a few.

CTSP Episode 071 - Michael Woodward, Reader's Choice Award, Coatings+ 2019

Mon, 18 Mar 2019 07:00:20 -0000

Jack Walker and Paul Atzemis are joined by Carboline's very own, award winning author, Michael Woodward. Michael's story about a bridge, "Troubled Bridge Over Salt Water," won the JPCL 2019 Reader's Choice award. Michael was presented with the award at the Coatings+ conference in an Awards Luncheon on Monday February 11, 2019.

CTSP Episode 070 - Holdtight, Ken Rossy, SSPC Coatings+

Mon, 11 Mar 2019 07:00:15 -0000

Jack Walker and Paul Atzemis continue their coverage at SSPC Coatings+ 2019. They sit down with Ken Rossy, VP of Sales and Marketing for Holdtight. The guys talk about Holdtight, salt removal, and surface cleanliness.

CTSP Episode 069 - Elcometer, Michael Sellars, SSPC Coatings+

Mon, 04 Mar 2019 08:00:30 -0000

Jack Walker and Paul Atzemis sit down with the Managing Director of Elcometer, Michael Sellars. The guys talk about the long history of Elcometer, their family tradition, Elcometer’s new products and where they are headed as a company.

CTSP Episode 068 - SSPC Coatings+, Nicole Lourette and Mike Kline

Thu, 28 Feb 2019 08:00:09 -0000

Jack Walker and Paul Atzemis are again at SSPC Coatings+. This time, they are joined by Nicole Lourette (Event Specialist) and Michael Kline (Director of Technology and Communications). The group discusses what it actually takes to put together an international conference like Coatings+.

CTSP Episode 067 - SSPC Coatings+, Bill Worms

Mon, 25 Feb 2019 08:00:09 -0000

Jack Walker and Paul Atzemis are recording live at SSPC Coatings+ at Walt Disney World in Orlando, Florida. They are privileged to be joined by the Executive Director of SSPC, Bill Worms.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 066 - Tim Holmes, Disney, SSPC, and Thick Film DTM Urethane

Mon, 18 Feb 2019 08:00:37 -0000

Jack Walker and Paul Atzemis go LIVE at SSPC Coatings+ 2019 at Walt Disney World. The guys kick off the event with one of Carboline's own sales representatives, Tim Holmes from Birmingham, AL. They talk about the importance and uses of direct to metal urethanes.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 064 - Airless Pump Basics with Dan Baribault

Mon, 04 Feb 2019 08:00:52 -0000

Jack Walker and Paul Atzemis bring fellow Tech Service Engineer and "pump whisperer" Dan Baribault to discuss Industrial Airless Spray Equipment. The trio discuss the basics of pump selection how sizes are made and chosen.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 063 - John Myers, Rail Car Linings in PaintSquare.com

Mon, 28 Jan 2019 08:00:01 -0000

Jack Walker and Paul Atzemis interview Carboline's Technical Sales Manager for Rail in the Southeast, John Myers. John wrote an article for JPCL and PaintSquare.com about a baked phenolic tank lining used for hauling Phenol for over 24 years and shows no signs of stopping.

CTSP Episode 062 - Rebar, Zinc, and Concrete

Mon, 21 Jan 2019 08:00:51 -0000

Jack Walker and Paul Atzemis discuss ASTM A775. The discuss the benefits and concerns of using Inorganic Zinc on steel that will be buried in concrete. They discuss the systems used for coating Rebar.

CTSP Episode 061 - ASTM D5402 Solvent Double Rub

Mon, 14 Jan 2019 08:00:26 -0000

Jack Walker and Paul Atzemis discuss the details of ASTM D5402, Solvent Rub test for organic coatings. They cover the how and why you need to know this standard.

CTSP Episode 060 - Isocyanate Technology and moisture

Mon, 07 Jan 2019 08:00:02 -0000

Jack Walker and Paul Atzemis are joined by recurring guest, William (Billum) Seawell. The guys discuss the common problems found when urethane technology and isocyanates are exposed to moisture.

CTSP Episode 059 - Stripe Coating

Mon, 31 Dec 2018 08:00:02 -0000

Jack Walker and Paul Atzemis discuss the purpose and process of Stripe Coating. What is it for and should you do it?

CTSP Episode 057 - Euclid Chemical, Aimee Pergalsky

Mon, 17 Dec 2018 08:00:02 -0000

Jack Walker and Paul Atzemis meet with Aimee Pergalsky, Central Region Business Development Manager for Euclid Chemical. The group discusses who Euclid Chemical is and what they do. They discuss the relationship of Euclid Chemical and Carboline, both RPM companies.

CTSP Episode 056 - Jim Rippe, Charity, and Fireproofing discussions

Mon, 10 Dec 2018 08:00:34 -0000

Jack Walker and Paul Atzemis have a discussion with the Executive Vice President of Fireproofing and Engineered Sales, Jim Rippe. The three discuss the CarboCare charity event of donating toys to Cardinal Glennon Children's Hospital in St. Louis. The have an adventure picking the next topic and discuss Carboline's soon to open new Fireproofing Testing lab.

CTSP Episode 055 - Live Part Deux now with Jeff Anderson of Carboline RD&I

Mon, 03 Dec 2018 08:00:57 -0000

Happy Birthday CTSP- Part Deux! In this birthday celebration followup, Jack Walker and Paul Atzemis record in front of a live audience with Jeff Anderson, Vice President of Research, Development, and Innovation for Carboline. The trio talk about what it takes to bring products to market.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 054 - Adhesion Value discussion

Mon, 26 Nov 2018 08:00:53 -0000

Jack Walker and Paul Atzemis discuss adhesion values and what they mean. How do we get maximum adhesion and how low should be acceptable.

CTSP Episode 053 - Chris Tiernay and Birthday Celebration

Mon, 19 Nov 2018 08:00:01 -0000

Happy Birthday CTSP Jack Walker and Paul Atzemis are joined by Carobline's president, Chris Tiernay, for a special live recording of the podcast. The three guys talk about Carboline's "why" and how the podcast came into existance. Thanks for a great first year!

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 052 - Near-White vs White Metal cleanliness

Mon, 12 Nov 2018 08:00:16 -0000

Jack Walker and Paul Atzemis discuss and debate the ability to achieve SSPC-SP10/NACE 2 vs SSPC-SP5/NACE 1 when performing surface prep. They debate the visual standard (VIS 1) vs the written standard and they pass around a few "Thank You's" in their final episode of the first season of the Carboline Tech Service Podcast.

CTSP Episode 051 - Color, is it really there?

Mon, 05 Nov 2018 08:00:17 -0000

Jack Walker and Paul Atzemis are joined once again with Carboline's Color Lab Manager, Kate Rogers. Kate discuss color with the guys. They talk about what is needed to see it and how it can change.

CTSP Episode 050 - Amine Blush

Mon, 29 Oct 2018 07:00:55 -0000

Jack Walker and Paul Atzemis discuss Amine Blush, where it comes from, how to prevent it, and what to do after you have it.

CTSP Episode 049 - Accelerators and Additives

Mon, 22 Oct 2018 07:00:28 -0000

Jack Walker and Paul Atzemis discuss cold weather coating cure process. They discuss what effects accelerators have on coatings and if they actually lower the acceptable cure temperature minimum.

CTSP Episode 048 - BYK additives, Ronald Brashear

Mon, 15 Oct 2018 07:00:10 -0000

Jack Walker and Paul Atzemis are joined by Ronald Brashear. Ron is the End Use Manager for Protective Coatings Additives in North America for BYK. The 3 discuss the important role BYK plays in coating formulation and how BYK can help.

CTSP Episode 047 - FDA and Force curing coatings

Mon, 08 Oct 2018 07:00:09 -0000

Jack Walker and Paul Atzemis are joined by Carboline's award winning Mary Roley as they answer a listener email. The group discusses the reasons for baking or force curing needed for linings in direct contact with food. They discuss the FDA, 21CFR 175.300, and most importantly Taste and Odor.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 046 - Hydrostatic Pressure

Mon, 01 Oct 2018 07:00:18 -0000

Jack Walker and Paul Atzemis feel the pressure. This week the guys discuss Hydrostatic Pressure and its effects on coatings.

CTSP Episode 045 - Water Jet Standards Explained

Mon, 24 Sep 2018 07:00:26 -0000

Jack Walker and Paul Atzemis discuss the joint SSPC/NACE Water Jet standards WJ-1, WJ-2, WJ-3, WJ-4. They are joined by Carboline Tech Service Engineer Dan Baribault.

CTSP Episode 044 - Acrylic Resins, Coating Selection Part 3

Mon, 17 Sep 2018 07:00:00 -0000

Jack Walker and Paul Atzemis discuss acrylic resins and what they are used for and how they are blended to modify coating properties.

CTSP Episode 043 - Alkyd Resins, Coating Selection Part 2

Mon, 10 Sep 2018 07:00:03 -0000

Jack Walker and Paul Atzemis talk about Alkyd resins, where they come from, and where they are now. They talk about uses, problems and benefits of alkyds.

CTSP Episode 042 - Organic Zinc, Coating Selection Part 1.2

Mon, 03 Sep 2018 07:00:59 -0000

Jack Walker and Paul Atzemis discuss Organic Zinc. This is the follow up to Episodes 015 and 016 on Inorganic Zinc. This discussion is the second part in a series of the how and why in making coating selections.

CTSP Episode 041 - SSPC-SP13/NACE No. 6 Surface Prep of Concrete update

Mon, 27 Aug 2018 07:00:23 -0000

Jack Walker and Paul Atzemis break down the updates to the joint standard from SSPC and NACE.

CTSP Episode 040 - Dry Film Thickness Gauges

Mon, 20 Aug 2018 07:00:42 -0000

Jack Walker and Paul Atzemis answer listener email. In this episode the discuss the differences in Type I and Type II dry film thickness (dft) gauges, how to use them, and types of “calibration” for these devices.

CTSP Episode 039 - Insulative Coatings with Steve Harrison

Mon, 13 Aug 2018 07:00:51 -0000

Jack Walker and Paul Atzemis are joined by Carboline's legendary Steve Harrison. The trio has a hot conversation about insulation. They discuss the properties and performance of Carbotherm 551 and Carbotherm 3300.

CTSP Episode 038 - SPC, Matt Alliston

Mon, 06 Aug 2018 07:00:54 -0000

In this episode, Jack Walker and Paul Atzemis interview Matt Alliston, the VP of the SPC division of Carboline. They talk history, pipelines, coatings, and surface prep.

CTSP Episode 036 - Polymer Concrete, Semstone 300, 305, 884

Mon, 23 Jul 2018 07:00:46 -0000

In this episode, Jack and Paul talk about the Hidden Gems in the Carboline Semstone line of Polymer Concretes. Semstone 300, Semstone 305 and Semstone 884 are discussed with some helpful information about when and where these products should be used.

CTSP Episode 035 - TruQC with Megan Brinker

Mon, 16 Jul 2018 07:54:00 -0000

The COO of TruQC Megan Brinker stops by to how TruQC can help report, track and analyze everything you need for compliance in a convenient mobile application. Paul, Jack and Megan also discuss advancements in technology that can be utilized on your industrial coatings project.

CTSP Episode 034 - Dry Abrasive Blast Standards, Part 2 with Dan Baribault

Mon, 09 Jul 2018 07:00:32 -0000

Jack Walker and Paul Atzemis are joined by one of Carboline’s Senior Technical Service Engineers, Dan Baribault. Joint them as they discuss Part 2 of the SSPC standards of Hand Tool and Power Tool surface preparation of steel.

CTSP Episode 033 - Dry Abrasive Blast Standards, Part 1 with Dan Baribault

Mon, 02 Jul 2018 07:00:10 -0000

Jack Walker and Paul Atzemis are joined by one of Carboline’s Senior Technical Service Engineers, Dan Baribault. Joint them as they discuss the joint NACE and SSPC standards of Dry Abrasive Blasting, surface preparation of steel.

CTSP Episode 032 - Soluble Salts, Chlor-Rid

Mon, 25 Jun 2018 07:00:51 -0000

Jack Walker and Paul Atzemis are joined in studio by Norman Petticrew of the Chlor-rid division of Borchers and Joe Harris of Borchers. The group talks about salts and debut a new segment...

CTSP Episode 031 - Value Engineering

Mon, 18 Jun 2018 08:30:00 -0000

Paul and Jack discuss what is actually in a gallon of paint. Why solids by volume is important when making a coating selection.

CTSP Episode 030 - Topcoating Inorganic Zinc

Mon, 11 Jun 2018 07:00:44 -0000

Jack Walker and Paul Atzemis discuss the common difficulties and problems with applying coatings over Inorganic Zinc Primers.

CTSP Episode 029 - The Corrosion Cell

Mon, 04 Jun 2018 07:00:20 -0000

Jack Walker and Paul Atzemis drop in on Corrosion. They meet up with William, Bill, Will Seawell and discuss the corrosion cell and how it effects our industry.

CTSP Episode 028 - Federal Standards

Mon, 28 May 2018 07:00:01 -0000

Jack Walker and Paul Atzemis make a stand with standards. They talk about Food Grade coatings and water system linings. Tune in to hear a summary of the differences between FDA, USDA, NSF/ANSI 61, AWWA C210 and D102.

CTSP Episode 027 - Surface Tolerant Coatings

Mon, 21 May 2018 07:00:42 -0000

CTSP Episode 023 - Coatings Under Insulation, NACE SP0198, CUI

Mon, 23 Apr 2018 07:00:15 -0000

Jack Walker and Paul Atzemis continue the discussion of Corrosion Under Insulation (CUI) with an in-depth explanation of the NACE SP0198 categories and the appropriate coatings for each. Make sure to listen to the end for the special caller they get a message from about last weeks episode.

CTSP Episode 022 - Corrosion Under Insulation (CUI) and NACE SP0198

Mon, 16 Apr 2018 07:00:53 -0000

Jack Walker and Paul Atzemis have target practice to discuss Corrosion Under Insulation (CUI) and NACE SP0-198.

CTSP Episode 021 - On location with Fire Testing

Mon, 09 Apr 2018 07:00:43 -0000

Jack Walker and Paul Atzemis join Carboline Fireproofing Chemist, Brooke Grau in the Fire Test Lab. Listen as they follow Brooke around for a Q & A about how a fire test is performed.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 020 - SSPC, James Kunkle interview

Mon, 02 Apr 2018 07:00:43 -0000

Jack Walker and Paul Atzemis are joined by SSPC’s very own Jim Kunkle. The three beards discuss current and future happenings at SSPC and opportunities available from SSPC.

CTSP Episode 019 - SFRM Part 2 Southwest Type 5 and 7

Mon, 26 Mar 2018 07:00:16 -0000

CTSP Episode 018 - SFRMs Pt. 1

Mon, 19 Mar 2018 07:00:00 -0000

Jack Walker and Paul Atzemis have Sean Younger in the studio to discuss Carboline's SFRM materials. Learn about the difference between gypsum and portland cement based materials.

CTSP Episode 017 - SSPC-SP13/NACE No. 6 Surface Prep of Concrete

Mon, 12 Mar 2018 07:00:31 -0000

Jack Walker and Paul Atzemis hit the concrete. In this episode, they discuss the details of SSPC-SP13/NACE No. 6 The Surface Prep of Concrete. They discuss the importance of moisture tests and the curing of concrete prior to painting.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 016 - Inorganic Zinc Part 2, Carbozinc 11 series

Mon, 05 Mar 2018 08:00:03 -0000

Jack Walker and Paul Atzemis continue their coverage of Inorganic Zinc and dive into the Carbozinc 11 series, specifically Carbozinc 11; Carbozinc 11 FC; and Carbozinc 11 HS. This is the second in the series of Zinc related topics. In this episode they cover the performance properties and case histories of the Carbozinc 11 series of products.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 015 - Inorganic Zinc, Carbozinc 11 series Part 1

Mon, 26 Feb 2018 08:00:44 -0000

Jack Walker and Paul Atzemis dive into the topic of Inorganic Zinc and the Carbozinc 11 series. This is the first in the series of Zinc related topics. In this episode they present the overall background for the reasons and benefits of using Inorganic Zinc to prevent corrosion.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 014 - Tank Lining Series, Part 4

Mon, 19 Feb 2018 08:00:06 -0000

Jack Walker and Paul Atzemis conclude this 4-part series on Tank Linings. They summarize the previous 3 episodes covering what information is needed to make an accurate tank lining recommendation, the chemistry of tank linings, and the common failures seen in tank linings.

CTSP Episode 013 - Tank Lining Series, Part 3 Lining Failures

Mon, 12 Feb 2018 08:00:01 -0000

Jack Walker and Paul Atzemis discuss lining failures in this Part 3 of their 4 part series on Tank Linings. They take an in depth look at Osmotic Blisters and Cold Wall effect. They are also joined by 2 very special guests to help introduce the podcast.

CTSP Episode 012 - Tank Lining Series, Part 2 Chemistry

Mon, 05 Feb 2018 08:00:01 -0000

Jack Walker and Paul Atzemis are joined by Dr. Absolutely (listen for the bell) Chris Fenoli, PhD as they continue the discussion in the tank lining series. This is the second episode in the series of what goes into choosing a tank lining. In this episode they discuss the chemistry of coatings and linings.

CTSP Episode 011 - Tank Lining Series, Part 1

Mon, 29 Jan 2018 08:00:15 -0000

Jack Walker and Paul Atzemis are joined by Technical Service Engineer and analytical chemist, William Seawell as they begin the discussion of choosing a tank lining. This is the first in the series of what goes into choosing a tank lining. In this episode they present the types of information required from the owner, specifier, or applicator prior to choosing the lining.

CTSP Episode 010 - Sanitile 755FR Application

Mon, 22 Jan 2018 08:00:56 -0000

Jack Walker and Paul Atzemis are again joined by Chris Fenoli, PhD. This time, they venture into Carboline’s Research, Development & Innovation (RD&I) Center for an application test and demo of the new Sanitile 755 FR.

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 009 - Weathering Finishes, Mary Roley, SSPC Award

Mon, 15 Jan 2018 08:00:15 -0000

Jack Walker and Paul Atzemis are joined by Mary Roley, Technical Director for R&D at Carboline. The discussion centers around the technology and testing of weathering finishes. The trio round out the conversation with a nod to the SSPC Women in Coatings Impact Award winner for 2018, Carboline’s own Mary Roley. Congratulations Mary!

Find out more at https://carboline-tech-service-podcast.pinecast.co

CTSP Episode 008 - Thermosorb Intumescent Coatings

Mon, 08 Jan 2018 08:00:50 -0000

Jack Walker and Paul Atzemis discuss Carboline's Intumescent Coatings, Thermo-Sorb E, VOC, and 263 with Sean Younger.

CTSP Episode 007 - SSPC-PA2, Carbocoat 8225

Mon, 01 Jan 2018 08:00:54 -0000

Jack Walker and Paul Atzemis interview a special guest about the details of SSPC-PA2. They then discuss the properties of Carboline's newest alkyd coating, Carbocoat 8225.

CTSP Episode 004 - Carbozinc 608 HB, & Overnight Night Low Temp Cure

Mon, 11 Dec 2017 08:00:52 -0000

Jack Walker and Paul Atzemis discuss Carboline's brand new innovative product Carbozinc 608 HB. Jack and Paul also answer a caller's question about dropping temps overnight and the effect on the curing process of coatings.

CTSP Episode 002 - Sanitile 755FR, Kate Rogers, Color, and Coating Thickness

Mon, 27 Nov 2017 08:00:39 -0000

Jack and Paul are joined by Chris Fenoli, PhD to discuss Carboline’s newly released: Sanitile 755 FR. Kate Rogers stops by to discuss Carboline’s color lab and its capabilities. Paul and Jack then discuss the possible procedures to correct excessive coating thickness.

CTSP Episode 001 - Carbomastic 94, Job Site Sampling, & Adhesion Testing

Thu, 16 Nov 2017 16:45:45 -0000

Paul Atzemis and Jack Walker discuss the many attributes of Carbomastic 94. They interview William Seawell to discuss proper jobsite sampling. Paul and Jack also discuss the differences in adhesion testing standards.